M1 intake question

[Her1970]

I have a M1 intake on a 360 magnum and am wondering what coil bracket is needed? I thought it was a SB 6pack bracket but this does not fit either. Pics and advice needed. Thanks

 

[Salty Dog]

The stock bracket fit's on the rear of the intake. Aftermarket brackets are close to the stock one but will need to be bent into position. If it is an aftermarket coil, it must be mounted straight up and down, not laying down. Or it will burn out fast.

 

[Her1970]

I need to look for a stock M1 bracket?

 

[Salty Dog]

UGH! NO, a stock coil bracket, the one that came on the car. Use that. An aftermarket coil bracket is doable.

 

[70aarcuda]

if it is a M1 single plane...there are no mounts cast into the intake manifold...

reading again..since it is a magnum...you might be able to make something that goes with the vertical mounting bolts..