Why?
Cley
Cley
Yes, but lift isn't the place you cut down on to make a cam more streetable.
Fixed
I was going to write; If you have it in your pocket, use 1.6 rockers to lift the valve up to take advantage of the heads better flow area. FWIW, this will have a direct impact on HP.
IIRC going to 1.6 ratio rockers, you gain around .025 lift on a .528 cam.
Unsure what rations are available for mopar but I know you can get 1.7 ratio rockers for some V8's.
Is it a factory mistake? When my engine was that the machine shop one of the main bearings had no hole for oiling.. I had to call Summit or Jags or the manufacturer whoever and have them send me a new set of bearings and I still have the old ones..So here's the next little issue! My damn rod bearings have no provision for the oil squirter holes. What the **** do I do with that?
Cley
View attachment 1715487154
So here's the next little issue! My damn rod bearings have no provision for the oil squirter holes. What the **** do I do with that?
Cley
View attachment 1715487154