My Hemi Denny Front Suspension Installation

[69Chrgr]

Got the G3 Hemi installed along with my HDK cradle. Still assembling but so far so good.

 

[4spdragtop]

Great video! Coming along beautifully!

 

[Super-Cuda]

Going together very nicely!

First time I've seen the HDK Front suspension system up that close.

Extremely well built and a great upgrade to the car in my opinion. (Que the shitstorm of comments LOL !!)

That is a beautiful notch as well.

Looking forward to your next posts.

 

[69Chrgr]

Thanks Guys! I will keep you posted.

Going together very nicely!

First time I've seen the HDK Front suspension system up that close.

Extremely well built and a great upgrade to the car in my opinion. (Que the shitstorm of comments LOL !!)

That is a beautiful notch as well.

Looking forward to your next posts.

 

[69Chrgr]

Here is Part 2 of the installation.

 

[CRUZE 418]

Really thoughtful, no installation instructions.

 

[69Chrgr]

Here is part 3 of my HDK installation.

 

[75slant6]

Really thoughtful, no installation instructions.

They literally come pre assembled, if you need instructions after that, you might want to pay someone to build your car for you.

 

[toolmanmike]

Cal Tracks for the win. SS springs work to a point but they have always jacked the back up.

 

[69Chrgr]

These will be available for sale very soon if anyone is interested.

 

[Super-Cuda]

Here is part 3 of my HDK installation.

Here's the stance you need in my humble opinion

This car has the perfect rake !!

 

[JDMopar]

I'm thinking you're going to need to cut the gusset off of the frame rails that the rubber bumper on the factory lower control arms bumped into. It will be in the way of your new coilovers.

 

[69Chrgr]

Great point. I might very well have to. I will video that part when we install them with our new Cal-Tracs here pretty soon.

 

[JDMopar]

Check with Denny and see. I installed one of HDK's torsion bar eliminator kits on my Duster and had to remove them. Thay may not be the case with the full suspension kit like you have. My hoops and UCA's are the same as yours, but your LCA's are way different. I will be your Amen corner about Denny being such a great guy to deal with.

 

[jimjimjimmy]

Check with Denny and see. I installed one of HDK's torsion bar eliminator kits on my Duster and had to remove them. Thay may not be the case with the full suspension kit like you have. My hoops and UCA's are the same as yours, but your LCA's are way different. I will be your Amen corner about Denny being such a great guy to deal with.

i hope the op don't mind me asking you a question on your setup . Do you find the car to handle any different or better . any pros or cons . Thanks .