Need some ideas/pics of coolant recovery tanks

[Mopar to ya]

I posted a little while ago about the Coolflex recovery tank I ordered. They no longer have a supplier for them, so I need to do something else. I want a good looking aluminum tank, and fairly small. Let's see those pics and hear your ideas!

Here is what I was going to go with to match my Coolflex hose.
View attachment Coolflex tank.jpg

 

[mopardude318]

Here's an idea. Something I did for my 68 cuda.

 

[inkjunkie]

My Fairlane just has a piece of SS pipe with an end welded shut and a lid of sorts. If I can get a picture of it I will.

 

[Mopar to ya]

My Fairlane just has a piece of SS pipe with an end welded shut and a lid of sorts. If I can get a picture of it I will.

F-f-f-f-f-fairlane? On a Mopar site? Oh my God! What are you thinking?
I almost bought one last year, and may still if it's still available.

 

[Mopar to ya]

Here's an idea. Something I did for my 68 cuda.

I saw that before, and it looks awesome. Did you just drill and tap the radiator and screw in a fitting?

 

[mopardude318]

it already had a hose barb in the filler neck for the over flow. its an Afco radiator.

 

[mod5v]

Old fire extinguisher. u can run the hose in the discharge nozzel or unscrew the top and use an adaptor. I ran it in the old discharge nozzel after rermoving the valve.

 

[TrailBeast]

I want to get one of those little aluminum beer kegs and make one out of that.

 

[Hersbird]

I'm going to buy a cheap white plastic one from Summit
http://www.summitracing.com/parts/RNB-603-001/
I think this will fit under the battery, that way I can keep everything else, like mainly the horns, looking stock. Plus the champon rad puts the nipple out that side.
Not pretty, and not aluminum, but hidden away.