[SOLD] NEW Magnum/LA Conversion Cam and Lifter Package

-
Status
Not open for further replies.

whitepunkonnitro

Well-Known Member
Joined
Dec 6, 2011
Messages
14,798
Reaction score
883
Location
Murfreesboro Tn
Rating - 98.2%
162   3   0
Contact seller
This is the perfect cam and lifter package if you're looking to mount Magnum heads on an 85 up roller cam LA block, and retain the mechanical fuel pump.
This cam is also drilled for traditional LA oiling, so it can actually be used with any heads.
Mopar Performance #P5007548.
Specs:
Lift .482/.496
Duration 222/278 (216/222 @.50)
Centerline 119
Overlap 37 degrees
I've only got one of these available right now, but if there is enough interest I can have several more the week of the 19th.
Asking $150 plus the ride. PM me if interested. Thanks FABO!
 
Ok, I sold one of these, and have one more on the shelf. If you guys have priced a set of roller lifters for a late motor, you know what kind of screaming deal this is!
 
cam seems small even for a 318. is 222 adv duration for the intake correct? also, whats the lsa?

You're right about that...mistake on my part. Cams did not come with cards, so I copied the hand written notes on the box.
222 is the correct .050 number. Advertised is somewhere in the 260's. These are Mopar Performance issued cams, but they were only available for a very short time, and there is not much information out there for them. These packages that I have look to be very early pieces. The boxes are plain white, with a Mopar Performance sticker on the end. No cards or literature or even decals in the actual package.
 

Status
Not open for further replies.
-
Back
Top Bottom