Oil filter adapter gasket?

[MB43]

There's a gasket that goes behind the plate that attaches the oil filter to the block, yes? Any idea where I could get that from? I've checked Summit, Jegs, Mancini, etc, but can't find it. But then again I'm not sure what it's called.

This is for a standard oil filter, not a right-angle one.

 

[jefflock]

I know they come in a FEL PRO overhaul gasket kit.

 

[SGBARRACUDA]

Several people sell it, including Summit, heres a link that gives the Mopar number and Summit ad.
http://cgi.ebay.com/ebaymotors/Mopa...VQQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247

 

[rumblefish360]

I got mine at the dealer. It has been some time ago when I got it.

 

[MB43]

Several people sell it, including Summit, heres a link that gives the Mopar number and Summit ad.
http://cgi.ebay.com/ebaymotors/Mopa...VQQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247

I've seen that one around at a few places, but it says it's for the right-angle adapter. That's the same one for the stock one?

 

[bobscuda67]

I made mine from a sheet of gasket material.

 

[Wheel Chock]

Yes, it is the same one, but if you have just the plain round one, you will also need a small round one to go under the adapter nipple itself.

 

[MB43]

Yes, it is the same one, but if you have just the plain round one, you will also need a small round one to go under the adapter nipple itself.

Ok, cool. Thanks.

 

[340 Dart]

Here you go. I just bolted one of these on the side of my 340 yesterday under a oil filter relocation kit. It has the small one you need also.

http://chucker54.stores.yahoo.net/oilfilad.html