[WANTED] Pre 67 A904 torque converter

[Sheldon Belden]

I am in need of a torque converter for my 66 dart it's a stock /6 with the a904 transmission. I did some research and it's a 18 spline tc from a 1967 and older a904 transmission. I have looked at summit and could not find an 18 spline like I need. I finally had a chance to put the transmission back together and installed to find the torque converter is bad. I also need the transmission cooler lines if anyone has a set of braided lines laying around

 

[rumblefish360]

I had the same issue but for a high performance issue. Couldn't find one. Do what I did. Send the converter out to be rebuilt.

 

[moper]

I've got a stock '65 slanty convertor. It worked fine when I pulled it a few years ago.

 

[IfItsGotWheels]

All I did was call PTC. Told them what I needed, had a new converter in a couple of weeks.

 

[Charrlie_S]

If you just want a stock converter, I have a couple, but shipping cost usually kills a deal. You can buy a fresh one one here, for not much money. Home | DACCO