[SOLD] REAL '69 A56 340 'cuda, console 4speed, EXPORT ORDER CAR!

-
Status
Not open for further replies.
BB-Dave

BB-Dave

Legandary Member
Legendary Member
Joined
Jun 9, 2010
Messages
1,512
Reaction score
118
Location
North East
Rating - 0%
0   0   0
Contact seller
OK, it's out of hibernation!!! Running/driving down the road, REAL A56 340 'cuda, 4speed, EXPORT ORDER(Y09)car? I've never seen another one! B5 blue, black buckets/head rests, console 4spd. Dash tag, fender tag, rad support, trunk lip, MOTOR, TRANS ALL MATCH. Very unmolested under the hood. Original carb, dual pt dist, 066 rad, air cleaner, exhaust manifolds, EXPORT ORDER tag, ect. I have the bottom half of the build sheet starting with the A codes showing A56. Has one of the nicest rear finish panels i've seen on an original car. Optional dash with 150 speedo, tach and trip odometer.
The car was likely redone in the '80s with the typical exterior resto and stripes painted on. Believed to be in CT most of it's life, now in NY. Will need the typical resto eventually. It was at Carlisle in the time bandits category in 2011.
PM Q's $13,800. FIRM, NO TRADES
 

Attachments

  • '69 340 'cuda FB, '70 6pak BEE 011 @50%.jpg
    139.3 KB · Views: 4,828
  • '69 340 'cuda FB, '70 6pak BEE 010.jpg@50%.jpg
    144.3 KB · Views: 4,658
  • '69 340 'cuda FB, '70 6pak BEE 009.jpg@50%.jpg
    141.4 KB · Views: 4,668
  • '69 340 'cuda FB, '70 6pak BEE 005.jpg@50%.jpg
    120.2 KB · Views: 4,725
  • '69 340 'cuda FB, '70 6pak BEE 004.jpg@50%.jpg
    111.9 KB · Views: 4,709
  • '69 340 'cuda FB, '70 6pak BEE 003.jpg@50%.jpg
    114.4 KB · Views: 4,702
  • '69 340 'cuda FB, '70 6pak BEE 001@50%.jpg
    129.1 KB · Views: 4,704
  • '69 340 'cuda FB, '70 6pak BEE 016.jpg@50%.jpg
    142.4 KB · Views: 4,722
  • '69 340 'cuda FB, '70 6pak BEE 013.jpg@50%.jpg
    121 KB · Views: 4,775
  • '69 340 'cuda FB, '70 6pak BEE 012 @50%.jpg
    131 KB · Views: 4,862
is it just me, or does it look like the exh manifolds are 2 different types? dr side looks like hp, pass side looks reg
 
mdh157 said:
is it just me, or does it look like the exh manifolds are 2 different types? dr side looks like hp, pass side looks reg
Click to expand...
No, right side is correct, looks just like this
attachment.php
 
BB-Dave, I am smitten with your car. I know you said no trades but it does not hurt to ask. I have a '70 Cuda 383 4 speed for trade that needs everything but is complete. It only has 8,000 miles on it. If you saw it you would know it's not 108,000. It was a drag car but not cut up. It is vitamin C orange with a black vinyl roof and rally dash. Currently has a real AAR hood on it, but have correct hood as well. The car's been in the barn many years and off the road longer. It is filthy and smells really bad. I do not want to sell but I would trade for your Cuda.
 

Attachments

  • IMG_1202.jpg
    125.8 KB · Views: 4,148
  • IMG_1200.jpg
    104.9 KB · Views: 4,157
  • IMG_1214.jpg
    160.7 KB · Views: 4,167
  • IMG_1217.jpg
    170.9 KB · Views: 4,179
  • IMG_1208.jpg
    115.3 KB · Views: 4,180
  • IMG_1219.jpg
    92.9 KB · Views: 4,209
Pic and a bump>>>>
 

Attachments

  • 340&440 002 @50%.jpg
    124.5 KB · Views: 3,934
Dave,
I PMed you a week ago Monday. Don't know if you got it. Here are a few more photos. I would trade for your Cuda. A 4 speed Cuda for a 4 speed Cuda, what do you think?
 

Attachments

  • IMG_1230.jpg
    195.1 KB · Views: 3,796
  • IMG_1204.jpg
    85 KB · Views: 3,773
  • IMG_1207.jpg
    72.8 KB · Views: 3,804
Beauty fish Dave!! Surprised it hasnt been snagged up! Quick observation...the lwr woodgrain in the bezel and glove box trim...somethings different?? Ive never seen glove box trim w/wood grain on 67-9 cuda...is that A56 specific??

Cheers n glws
4spdragtop
 
here's another A56 car with that wood grain
 

Attachments

  • IMG_1270.jpg
    28.4 KB · Views: 2,486
  • IMG_1271.jpg
    29 KB · Views: 2,490
He has said in his first posting that the '70 'cuda isn't for sale
 
Dave,
Ill buy it for $13,800 if you can pay delivery to California shipping in Wilmington.
Ill Bring her back to Australia and watch all the Mopar fans FREAK OUT at a time capsule.
 
davescuda said:
I have see about 8 cars with that wood grain on them. Dealer installed maybe?
Click to expand...


Not dealer installed . JC Wintney sold those wood appliques back around 30 years ago. About 10 bucks ,one of my 68-S cars had that. Real wood too.
 
On my car it's not that nice of a job, so someone did it them self at home i would say.

Bottom half of build sheet showing A56. Also has the BIG hand written WOOD GR......wood grain
 

Attachments

  • '69 340 'cuda FB, '70 6pak BEE 040.jpg@50%.jpg
    59.9 KB · Views: 2,361
  • '69 340 'cuda FB, '70 6pak BEE 041.jpg@50%.jpg
    55 KB · Views: 2,355
A56 B5 EXPORT car is going back into HIBERNATION, so the BLACK 383-S, 4spd, NOTCH can come out!!!!!!!!!!!!! Might be a plate change so the B5 EXPORT might be OFF the road.
 
I'm not some BS'ing car salesman. A couple of guys interested until they see the drivers floor pan needs replacing?? It's just a floor pan/sheetmetal??? Just a COOL *** car that really doesn't need to be restored at any point??......LOOKS F...ing COOL in my garage!!!!!............ Don't waste my time......I"LL KEEP HER although fastback isn't my thing, all #'s matching 4 SPEED!!!!!!! MOVE ON, GO FIND ANOTHER ONE >>>>>It's off the market>>>>>>>>>>>>>
 
4spdragtop said:
Beauty fish Dave!! Surprised it hasnt been snagged up! Quick observation...the lwr woodgrain in the bezel and glove box trim...somethings different?? Ive never seen glove box trim w/wood grain on 67-9 cuda...is that A56 specific??

Cheers n glws
4spdragtop
Click to expand...

The wood grain on the lower portion doesn't match the OEM. Definitely added. A little more of that wood grain below the ash tray area. Dunno what that is. Anyway...
GLWS
 
Status
Not open for further replies.
-

Back
Top