[SOLD] REAL '69 A56 340 'cuda, console 4speed, EXPORT ORDER CAR!

[BB-Dave]

OK, it's out of hibernation!!! Running/driving down the road, REAL A56 340 'cuda, 4speed, EXPORT ORDER(Y09)car? I've never seen another one! B5 blue, black buckets/head rests, console 4spd. Dash tag, fender tag, rad support, trunk lip, MOTOR, TRANS ALL MATCH. Very unmolested under the hood. Original carb, dual pt dist, 066 rad, air cleaner, exhaust manifolds, EXPORT ORDER tag, ect. I have the bottom half of the build sheet starting with the A codes showing A56. Has one of the nicest rear finish panels i've seen on an original car. Optional dash with 150 speedo, tach and trip odometer.
The car was likely redone in the '80s with the typical exterior resto and stripes painted on. Believed to be in CT most of it's life, now in NY. Will need the typical resto eventually. It was at Carlisle in the time bandits category in 2011.
PM Q's $13,800. FIRM, NO TRADES

 

[mdh157]

is it just me, or does it look like the exh manifolds are 2 different types? dr side looks like hp, pass side looks reg

 

[BB-Dave]

is it just me, or does it look like the exh manifolds are 2 different types? dr side looks like hp, pass side looks reg

No, right side is correct, looks just like this

 

[mdh157]

No, right side is correct, looks just like this

interesting..........i never noticed that before, but it makes sense now that i see them out of the car. maybe making room for the steering rod?

 

[CUDACOX]

What is the trunk/frame etc like? Maybe some pic's! NY is not too far for us guys north of the boarder to drive and pick up!

 

[4 on the floor]

BB-Dave, I am smitten with your car. I know you said no trades but it does not hurt to ask. I have a '70 Cuda 383 4 speed for trade that needs everything but is complete. It only has 8,000 miles on it. If you saw it you would know it's not 108,000. It was a drag car but not cut up. It is vitamin C orange with a black vinyl roof and rally dash. Currently has a real AAR hood on it, but have correct hood as well. The car's been in the barn many years and off the road longer. It is filthy and smells really bad. I do not want to sell but I would trade for your Cuda.

 

[BB-Dave]

Pic and a bump>>>>

 

[4 on the floor]

Dave,
I PMed you a week ago Monday. Don't know if you got it. Here are a few more photos. I would trade for your Cuda. A 4 speed Cuda for a 4 speed Cuda, what do you think?

 

[BB-Dave]

not triying to be funny but the ad says No trades.

Yeah i know, but that '70 is interesting! Might go have a look.....:glasses7:

 

[4spdragtop]

Beauty fish Dave!! Surprised it hasnt been snagged up! Quick observation...the lwr woodgrain in the bezel and glove box trim...somethings different?? Ive never seen glove box trim w/wood grain on 67-9 cuda...is that A56 specific??

Cheers n glws
4spdragtop

 

[johnnycuda]

Looks to me like it was added also, like it's some kind of adhesive tape

I bet it was added by a previous owner.

 

[davescuda]

I have see about 8 cars with that wood grain on them. Dealer installed maybe?

 

[davescuda]

here's another A56 car with that wood grain

 

[BB-Dave]

He has said in his first posting that the '70 'cuda isn't for sale

 

[1967formulaS]

Dave,
Ill buy it for $13,800 if you can pay delivery to California shipping in Wilmington.
Ill Bring her back to Australia and watch all the Mopar fans FREAK OUT at a time capsule.

 

[4spdragtop]

here's another A56 car with that wood grain

Thanks Dave, if dealer installed that would be a pain in the arse to install around the script/fish!

 

[formula_s]

I have see about 8 cars with that wood grain on them. Dealer installed maybe?

Not dealer installed . JC Wintney sold those wood appliques back around 30 years ago. About 10 bucks ,one of my 68-S cars had that. Real wood too.

 

[BB-Dave]

On my car it's not that nice of a job, so someone did it them self at home i would say.

Bottom half of build sheet showing A56. Also has the BIG hand written WOOD GR......wood grain

 

[BB-Dave]

A56 B5 EXPORT car is going back into HIBERNATION, so the BLACK 383-S, 4spd, NOTCH can come out!!!!!!!!!!!!! Might be a plate change so the B5 EXPORT might be OFF the road.

 

[BB-Dave]

I'm not some BS'ing car salesman. A couple of guys interested until they see the drivers floor pan needs replacing?? It's just a floor pan/sheetmetal??? Just a COOL *** car that really doesn't need to be restored at any point??......LOOKS F...ing COOL in my garage!!!!!............ Don't waste my time......I"LL KEEP HER although fastback isn't my thing, all #'s matching 4 SPEED!!!!!!! MOVE ON, GO FIND ANOTHER ONE >>>>>It's off the market>>>>>>>>>>>>>

 

[BB-Dave]

Bump if someone's gotta have it...............

 

[RedFish]

Beauty fish Dave!! Surprised it hasnt been snagged up! Quick observation...the lwr woodgrain in the bezel and glove box trim...somethings different?? Ive never seen glove box trim w/wood grain on 67-9 cuda...is that A56 specific??

Cheers n glws
4spdragtop

The wood grain on the lower portion doesn't match the OEM. Definitely added. A little more of that wood grain below the ash tray area. Dunno what that is. Anyway...
GLWS

 

[HemiMark]

what makes it rare?

 

[limelite70]

what makes it rare?

68 made

 

[davescuda]

still for sale