joes68340s
Well-Known Member
Interesting Ive got a tti sys in my 68 Barracuda with the turbos but there to loud for me. Its funny I was going to run a new set of ultra flows for the track but not now.
What's the rest of your setup and plans for the future? Full 2.5" exhaust with manifolds requires custom-bent downpipes or ones from TTI (also included in full system). If you are planning on putting full-length headers on anytime soon I would hold off on doing the exhaust until you get them and do the entire system front-to-back at once.
Hey VOETOM have you flow tested one of these by any chance?
http://www.classicchambered.com/index.html
I have a pair of the longest 2.5" "powersticks" on my '70 Duster and I love the sound, about as raw as it can get...
Somebody could make a "S" shaped muffler. lol
How old were those Accurate mufflers?? I have been told there are a different style with newer vs. older mufflers. I bought mine in 2000 and they look like your cutaway mufflers when I cut mine open too. I replaced those Accurate mufflers with a pair of DynoMax Super Turbo mufflers. With NO other changes, my GTS ran a full second faster in the 1/4 mile and picked up almost 4 MPH! I have since replaced the Accurate 2 1/4" system with a TTi 2 1/2" system X pipe with Ultra Flo mufflers. That was worth another .2 in the ET and 1 1/2 mph.
Mope, we have not but I bet they pass a lot of air through them since there are not many restrictions. If they have 2.5" center tubes, they will work well. I have heard some chambered Camaros and man, even stock, they are loud!!!
Tom
I think I bought the mufflers around the same time as you, 2001 maybe.
Your new mufflers took a full second off your et? Thats huge. How loud were your Super Turbos? How loud is it now with the Ultra Flos? I'm going to change my whole exhaust system this winter and I'm trying to get input on which mufflers to use.
Dr. Gas does!
What's the rest of your setup and plans for the future? Full 2.5" exhaust with manifolds requires custom-bent downpipes or ones from TTI (also included in full system). If you are planning on putting full-length headers on anytime soon I would hold off on doing the exhaust until you get them and do the entire system front-to-back at once.
Hey VOETOM have you flow tested one of these by any chance?
http://www.classicchambered.com/index.html
I have a pair of the longest 2.5" "powersticks" on my '70 Duster and I love the sound, about as raw as it can get...
Accurate also makes a 2.5" system.