SB Xram Pics - Edelbrock STR12 Manifold

-
This has been tried before. Edelbrock no longer has the cores to cast the intake so it will never be made again. There still show up on ebay from time to time, Be prepaired. I lost an auction for one with a $500 bid. That was 6 years ago.
 
Here is one we saw at the *** show in Issaquah. The guy found it at a swapmeet for 300 bucks it had a cracked top so he got a new top cnced from billit. I can remember who he said did the top but Ross might remember. He said they still had the specs on a disk.

http://i88.photobucket.com/albums/k199/360scamp/***%20Mopar%202008%20show/100_0974.jpg
http://i88.photobucket.com/albums/k199/360scamp/***%20Mopar%202008%20show/100_0975.jpg
http://i88.photobucket.com/albums/k199/360scamp/***%20Mopar%202008%20show/100_0976.jpg
http://i88.photobucket.com/albums/k199/360scamp/***%20Mopar%202008%20show/100_0979.jpg
http://i88.photobucket.com/albums/k199/360scamp/***%20Mopar%202008%20show/100_0980.jpg
http://i88.photobucket.com/albums/k199/360scamp/***%20Mopar%202008%20show/100_0977.jpg
http://i88.photobucket.com/albums/k199/360scamp/***%20Mopar%202008%20show/100_0978.jpg
http://i88.photobucket.com/albums/k199/360scamp/***%20Mopar%202008%20show/100_0981.jpg
http://i88.photobucket.com/albums/k199/360scamp/***%20Mopar%202008%20show/100_0982.jpg
 
I tell you ... I love the entire look of that setup. I can't make up my mind on the air cleaners though. One second, I love them and the next, I am not so sure. It would have been nice to come up with an air cleaner setup that sealed to the openings in the hood. I definitely like the custom air cleaner stickers. Do you guys have any contact info for the owner of the Dart?
 
I know he is a local guy that lives on Bainbridge island and he is in the All round mopar club in Kitsap county. Im betting that he will be at the Saints show in Port Orchard. I will get his info for you if I see him or anyone in his club.
 
I have an NOS STR12, never used if anybody is interested, going a different direction with my project. Not giving it away, just want to get my investment back. photos upon request. Thanks.
 
360scamp said:
I know he is a local guy that lives on Bainbridge island and he is in the All round mopar club in Kitsap county. Im betting that he will be at the Saints show in Port Orchard. I will get his info for you if I see him or anyone in his club.
Click to expand...

He never showed up to the last show but I know what club he is in and Im pretty sure that his name is Mike Dawson. here is a link to the members of the club and his name is almost on the bottom "Mike D" click his name for his email. He has all the info to get new billit tops made up.

http://allaroundmopars.com/members.htm
 
R1ze said:
I have an NOS STR12, never used if anybody is interested, going a different direction with my project. Not giving it away, just want to get my investment back. photos upon request. Thanks.
Click to expand...

PM sent.
 
360scamp said:
He never showed up to the last show but I know what club he is in and Im pretty sure that his name is Mike Dawson. here is a link to the members of the club and his name is almost on the bottom "Mike D" click his name for his email. He has all the info to get new billit tops made up.

http://allaroundmopars.com/members.htm
Click to expand...

Thanks JR. I just emailed him.
 
R1ze said:
I have an NOS STR12, never used if anybody is interested, going a different direction with my project. Not giving it away, just want to get my investment back. photos upon request. Thanks.
Click to expand...

R1ze, Welcome to the site.
What else you got?
Throw some project pics up.
 
Well, i have a 1970 cuda 340 4 speed, will add on a shaker hood setup and rear window louvers, which I have already (both). Collecting parts for a stroker sb motor. Car is non running at this time. Also have a 71 duster with 318 two barrel, with three speed manuel on the floor and 8-3/4 sure grip rear, has factory sunroof too. Unusual car, but also in need of a restoration or restification. Have my hands full.
 
I would send them the money right now for one if they would put them on the market again.
 
<< jumpin' up and down and waving frantically to catch Ben's eye out west >>

Ohhhhhhhh, my friend ... I'd LOVE an opportunity to make that bad boy beautiful for ya. Wonder if it would fit in my oven???? :-\"
 
I know, I know. I was thinking along the same lines. As it gets closer, I may have a few questions for you and we can toss a few ideas and numbers around. Thanks for the message Leanna.
 
Picts from a local dart.

heard it was one of Dudek's cars at one time.
Enjoy :)

Picture 033.jpg


Picture 034.jpg
 
did you guys ever find any more info on the info for modifying this manifold to eliminate the fuel puddling in the intake valley?? i have a BB version set up for a 6pak but haven't found any info on linkages or anything. just vague references to popcicle sticks and epoxy.................
 
I have the str12 and the str14.I am going th use the str14 on my cuda and right at this moment I don't know what I am going to do with the str12.I know Iam not going to sell it.

183.jpg
 
If you want to know about modifying the cross ram it is in the mopar performance book in the b / rb seciton.Sarting at page.326 . :angry7:
mauve66 said:
did you guys ever find any more info on the info for modifying this manifold to eliminate the fuel puddling in the intake valley?? i have a BB version set up for a 6pak but haven't found any info on linkages or anything. just vague references to popcicle sticks and epoxy.................
Click to expand...
 
If you want to know about modifying the cross ram it is in the mopar performance book in the b / rb seciton.Sarting at page.326 . :angry7:


all years book or just the old DC books?? thanks also
 
mauve66 said:
If you want to know about modifying the cross ram it is in the mopar performance book in the b / rb seciton.Sarting at page.326 . :angry7:


all years book or just the old DC books?? thanks also
Click to expand...
The 1989 mopar engines book.
 
You must log in or register to reply here.
-

Back
Top