Hey guys, so I just completed a 318 to 360 swap and I've yet to get this thing started. (Once I fix one thing another comes up) but while trying to get my car to start my battery went dead so I got it charged when I got it back in nothing would happen. No clicking or anything. With the new starter in I tried doing the screwdriver trick, it sparked a little bit and engaged for a second, then after that nothing.
Things that I've done so far are; switch out starter and and test voltage in wires with a multimeter. Pretty much they all read 12.68 except for the small thinner wire on starter. I've checked fuses and a couple were blown so I replaced them also.
Any guesses as to what the problem is? It's just strange that it was turning over engine one day and the next I've got nothing.
Things that I've done so far are; switch out starter and and test voltage in wires with a multimeter. Pretty much they all read 12.68 except for the small thinner wire on starter. I've checked fuses and a couple were blown so I replaced them also.
Any guesses as to what the problem is? It's just strange that it was turning over engine one day and the next I've got nothing.