shadango
Well-Known Member
- Joined
- Jan 10, 2009
- Messages
- 814
- Reaction score
- 4
The steering wheel on my Barracida was just stuck on the shaft (barely) with no nut.....so I started looking into gettin ga nut...
Someone on the cuda-challenger.com site said it is is a 1/2" fine lock nut.
Well,I found a couple of 1/2-fine (20) nuts.....one a stop nut the other a nylon lock nut.
However, seems that the top of the shaft is a little mushroomed over.....I have a thread chaser die and a thread file and thought I was making a little progress but no joy.....the die doesnt seem to want to start ......
Afraid to get too aggressive and really louse up the shaft.....
Any words of wisdom on this?
Someone on the cuda-challenger.com site said it is is a 1/2" fine lock nut.
Well,I found a couple of 1/2-fine (20) nuts.....one a stop nut the other a nylon lock nut.
However, seems that the top of the shaft is a little mushroomed over.....I have a thread chaser die and a thread file and thought I was making a little progress but no joy.....the die doesnt seem to want to start ......
Afraid to get too aggressive and really louse up the shaft.....
Any words of wisdom on this?