Stop in for a cup of coffee

-
I see that big surf I was drivin' by yesterday made the national news. I was tempted numerous time to pull off PCH and watch for a bit.

1703865638720.png

There's a state campground in that area that just amounts to a 2 lane paved road that ain't but 15' from the beach and 10' above the high tides and it goes for miles :realcrazy:
 
Coffee break.
Back to grinding welds.
If i could figure out the tig welding i think i would enjoy this stuff a little more.
But lift arc is a real pain. Steady wrecking the tungsten.
 
Finally got around to starting the snow blowers. Neither started right away. Honda is straight gas and still over half tank I put in it last year.. After a few pulls, I drained a little out of the bowl and it fired on next pull. Took a little finagling with the choke, but then ran good. My older and much more used TORO is mix gas which I added some fresh. . That gave nothing from pull cord. Electric start would not engage at first. Finally got it to catch and it smoked horribly. But eventually cleared and was easy to re-start with pull cord. So...
Let it Snow!
 
zkx14 said:
Finally got around to starting the snow blowers. Neither started right away. Honda is straight gas and still over half tank I put in it last year.. After a few pulls, I drained a little out of the bowl and it fired on next pull. Took a little finagling with the choke, but then ran good. My older and much more used TORO is mix gas which I added some fresh. . That gave nothing from pull cord. Electric start would not engage at first. Finally got it to catch and it smoked horribly. But eventually cleared and was easy to re-start with pull cord. So...
Let it Snow!
Click to expand...
I should go check my Arias Blower before I head back to Viet Nam.......
 
Well, I am back from my probing violation. All seems ok with them, the Doc said. Hopefully not doing again anytime soon..... :lol:
 
Stopped at the Chick-fil_A next door and bought a FULL bag of food.......Ate half of it on the way home...... :thumbsup:
 
zkx14 said:
Finally got around to starting the snow blowers. Neither started right away. Honda is straight gas and still over half tank I put in it last year.. After a few pulls, I drained a little out of the bowl and it fired on next pull. Took a little finagling with the choke, but then ran good. My older and much more used TORO is mix gas which I added some fresh. . That gave nothing from pull cord. Electric start would not engage at first. Finally got it to catch and it smoked horribly. But eventually cleared and was easy to re-start with pull cord. So...
Let it Snow!
Click to expand...
No No Keith that's a 4-letter word.
 
Ronald Leong has passed away. One of the pioneers of Funny Car
 
Just got a call from a guy saying he works for the state and I need to go to the local Sheriffs office and get and Eletronic bonding voucher and send it to Bismark North Dakota with $2,500 bucks. He said He needs to stay in constant contact with me while I drive the 18 miles to the police station. :wtf: :mob: Scammers need to be shot or hung from a rope. Both would be best.
 
Frodee said:
Just got a call from a guy saying he works for the state and I need to go to the local Sheriffs office and get and Eletronic bonding voucher and send it to Bismark North Dakota with $2,500 bucks. He said He needs to stay in constant contact with me while I drive the 18 miles to the police station. :wtf: :mob: Scammers need to be shot or hung from a rope. Both would be best.
Click to expand...
Just tell him you don't drive.
 
Old man ray said:
Just tell him you don't drive.
Click to expand...
Was even better I told him I can't hear and made him talk louder and slower. I also got his cell phone # and sent him a nasty note.
Kept him on the phone for a long time saying what? speak louder so I make sure I have the right address to send the money.
 

You must log in or register to reply here.
-

Similar threads

E
ESPO Springs n Things
Replies
16
Views
408
RustyRatRod
RustyRatRod
ocdart
Bye, bye Parnelli...there's a spot on the front row waiting for you
Replies
12
Views
764
Chargervert
C
Johnny Mac
Stop in and see BluePrint Engines at Carlisle 2025! First time attending! Show Specials :)
Replies
8
Views
737
Johnny Mac
Johnny Mac
340six
Interested in a different type of build thread
Replies
3
Views
267
340six
340six
HawkRod
2025 Carlisle FxBO Tent Luncheon
2
Replies
26
Views
2K
Kern Dog
Kern Dog
Back
Top Bottom