Stop in for a cup of coffee

[WV64Signet]

I would love a transjack, problem is working on the floor and not able to get the car high enough for one... right now i slide the trans under then use a ratchet strap to get it high enough to get the floor jack under the trans

That's what I fight with.

6 ton jack stands, each on top of 4 or 5 pressure treated 2 x 12s... then remove one front wheel to clear the bell housing.



This one looks like it'll get down lower... but I'm not spending that much....

https://hftools.com/app70185

 

[Icetech]

That's what I fight with.

6 ton jack stands, each on top of 4 or 5 pressure treated 2 x 12s... then remove one front wheel to clear the bell housing.

yeah, i use normal jackstands way up.. and take the tire off also.. and a jack under the k-frame/engine to keep it from tilting back (the engine)

 

[Kendog 170]

Saw this.
1972 plymouth duster project

 

[Icetech]

Saw this.
1972 plymouth duster project

that's a really good deal.. those are us cartool connnectors also.. good stuff. I still haven't put my torque boxes in.. one day...

 

[WV64Signet]

that's a really good deal.. those are us cartool connnectors also.. good stuff. I still haven't put my torque boxes in.. one day...

Write up sounds promising

Might be looking to part with these cars if somebody had interest in finishing the project.. both cars have titles one on the stand is from Cali no rust or rot at all has torque boxes and frame connectors tacked in. other is a great parts car rotted and crashed but has every nut and bolt u would need to make one good one, also have a whole truck load of parts for these cars. Mint doors,fenders, trim, grill, bumpers 8 3/4 list goes on no engine I do have a 360 I could throw in maybe some other stuff Not interesting in parting out u take it all

 

[Icetech]

Write up sounds promising

Might be looking to part with these cars if somebody had interest in finishing the project.. both cars have titles one on the stand is from Cali no rust or rot at all has torque boxes and frame connectors tacked in. other is a great parts car rotted and crashed but has every nut and bolt u would need to make one good one, also have a whole truck load of parts for these cars. Mint doors,fenders, trim, grill, bumpers 8 3/4 list goes on no engine I do have a 360 I could throw in maybe some other stuff Not interesting in parting out u take it all

yeah.. it sounds like a full project but a good start... be easy to minitub that in it's current state also

 

[Deltatech]

Quick question,

What kind of phycopath cuts a bunch like this? No, they came this way. I am sure whomever did this has tortured kittens and other animals...

View attachment 1716401921

This reminds me of the pickle slicer joke!

 

[Icetech]

man.. to box and ship my converter was $88..... just wtf... total 881... used amazon points to pay for it.. so pretty much cost nothing but still.. annoying

 

[WV64Signet]

man.. to box and ship my converter was $88..... just wtf... total 881... used amazon points to pay for it.. so pretty much cost nothing but still.. annoying

Core shipping costs are cray.

I just paid the core fee last time. Cheaper than shipping

 

[WV64Signet]

This is SOOO ME

4.4M views · 34K reactions | Rather throw it away then be lowballed #cars #automotive #trucks #comedy #dieseltrucks | Dippin' Diesel

 

[WV64Signet]

 

[dukeboy440]

View attachment 1716402277

Hmmm

 

[fatoldguy]

What about them Oiler's!

 

[Deltatech]

Hmmm

Hmmm

Right, How are they going to close that much road from the public?
and how do we transition from the fairgrounds track to open road?

 

[AMC Diplomat]

Morning everyone. I came across a guy on Facebook with slant 6 parts and I'd figured I'd share

Log into Facebook

Log into Facebook to start sharing and connecting with your friends, family, and people you know.

www.facebook.com

Log into Facebook

Log into Facebook to start sharing and connecting with your friends, family, and people you know.

www.facebook.com

Log into Facebook

Log into Facebook to start sharing and connecting with your friends, family, and people you know.

www.facebook.com

He has a 999 torque converter listed that I just paid him for, and I saw the other stuff listed. I figure there's gotta be some slant 6 hoarders out there

 

[WV64Signet]

Right, How are they going to close that much road from the public?
and how do we transition from the fairgrounds track to open road?

Race is a bit of an overstatement I think

 

[Deltatech]

Morning everyone. I came across a guy on Facebook with slant 6 parts and I'd figured I'd share

Log into Facebook

Log into Facebook to start sharing and connecting with your friends, family, and people you know.

www.facebook.com

Log into Facebook

Log into Facebook to start sharing and connecting with your friends, family, and people you know.

www.facebook.com

Log into Facebook

Log into Facebook to start sharing and connecting with your friends, family, and people you know.

www.facebook.com

He has a 999 torque converter listed that I just paid him for, and I saw the other stuff listed. I figure there's gotta be some slant 6 hoarders out there

If anyone needs a running slant 6 and 904 that needs a new band (take a wild guess who drove a slant 6 /904 with the kickdown too loose for 1/2 mile before he became a Mopar guy?) I have one with no plan to use it so far. It comes with a free 7 1/4.....

 

[Icetech]

This is SOOO ME

4.4M views · 34K reactions | Rather throw it away then be lowballed #cars #automotive #trucks #comedy #dieseltrucks | Dippin' Diesel

I am the same.. if someone sends me a stupid low offer i block/ignore

 

[AMC Diplomat]

If anyone needs a running slant 6 and 904 that needs a new band (take a wild guess who drove a slant 6 /904 with the kickdown too loose for 1/2 mile?) I have one with no plan to use it so far. It comes with a free 7 1/4.....

Ah yes, the free 7 1/4

At the end of the world, only the cockroaches and 7 1/4 axles will remain

 

[Sublime one]

What about them Oiler's!

Mehh

 

[Deltatech]

Ah yes, the free 7 1/4

At the end of the world, only the cockroaches and 7 1/4 axles will remain

It may become a bush hog, turned down, and blade attached to the yoke.

 

[toolmanmike]

View attachment 1716402277

Cool. They stop for lunch here on Sunday the 22nd. It looks like downtown which is 5 min away from my house.

 

[AMC Diplomat]

It may become a bush hog, turned down, and blade attached to the yoke.

That's actually a really good idea. Now you got me thinking about my 7 1/4 and taking a leaf spring out of my scrap pile to make a blade

 

[WV64Signet]

Mehh

 

[DartGT55]

Companies that are smart.. i wish everyone used USPS.. it's like 1/3 the cost of ups/fedex and same speed/damage...

Plus UPS and Fedex have never run over my mailbox.......................

There’s a first time for every thing