zkx14
Duster De-ruster
Mornin Mr Hops,
Did you get lost on your way to "the other drinking tread"?
Did you get lost on your way to "the other drinking tread"?
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
No the net went down last night. I had to amuse myself without others interacting. What RPMs does your duster do at 55? Roughly?
Mornin Ray
Hey Mitch work on the deck over the weekend?
Mine's Sittin Still !!
zkx14
Duster De-ruster
Is this a trick question? The only place I ever drove it is around the yard. Got it up to about 20 and had to hit the brakes. Oh, and it doesn't have a tach. LOL
Yup, Built three sets of steps. Need to do one more, then finish the rails. Big day yesterday. Did a tune up on a 99 Dakota, An all around brake job on a PT Looser. And... tore out the Air handler from the laundry room.
Mine is doing around 4500 and it seems high. Going to adjust the kickdown band and adjustment today to see if it helps. It does not seem to be slipping. Just weird to me seems high.
OOps sorry the coffee is still breweing, forgot. Did you see the link I posted on the cop light? I cannot believe they still have them. Deer spotting in a classic!
Dam you were busy! It was hot here for sure yesterday.
Yeah, I just can't say no to people and turn them away. I invoiced over 1K yesterday. I will send the big jobs and motors and trans's away to other shops that used to be my Parts customers . Wife say's I do it to myself, quit complaining. LOL
roadrunnerh
Well-Known Member
Mornin' fellas. (responding from yesterday) I'm good, how are you Tike?
G'Mornin George
Morning. DNA is awol this morning.
I just did the rpm calculator and it should be around 2500/ I did not realize the tires were 29" tall!
Must be the spedo is off. It does bounce between 20 and 90. I just ordered the cable.
Yup, A sticking cable can make it bounce
Hey a neat thing to share. When I put the gauges in I ran a power wire over a lot of stuff and was afraid it would chafe and it was a ***** to run it. I had some of the hard plastic water line that goes onto a fridge and used that to run it in. It was great just aim and push it and it went right where I wanted it!
When the panel was out I ran it up with a drill and it was nice and smooth. Just one of those things you do not know about until you drive it. It sat for years also. Lubed it but no go.
Wonder what kind of condition my is in on the GTS. I know this car sat for 30yrs.
Good morning Gents. Coffee's brewin"
One way to find out run a drill on the tranny end?
Morning Mike.
Yeah, I'll do that when I get it in the lift bay. LOL
I just got one from rock auto. 18.00
-
Similar threads
