Stop in for a cup of coffee

[krazykuda]

Also had to take the pb booster off also. Hope Chris takes this into account when he has his apart. At least the blower mod.

Do you mean pb blaster....

 

[halifaxhops]

It does look good there. Quite incognito I might add.

Catch the intake pic last night! Looks mean!

 

[halifaxhops]

Tell you what the trunk is going from a 4 body to a one body quick putting all the stuff back there.

 

[ScampMike]

Well checked out the intake components yesterday no obvious issues and got the valve covers off what a pain the blower motor is. Had to loosen it up and push it in as far as I could then get Ron's retard strength going with a prybar on the firewall and flex it in 1/4 inch! It needs that mod for sure.

yippie!! makes me wonder how you ever got that big block in there in the first place..

 

[halifaxhops]

Hey does the GTS have a blower motor/valve cover issue?

 

[ScampMike]

See it works! I actually went back to last night when I bailed.

 

[MOPARMITCH]

yippie!! makes me wonder how you ever got that big block in there in the first place..

No.. Factory low block. But I do have the taller NLA Direct Connection valve covers on it.

 

[halifaxhops]

yippie!! makes me wonder how you ever got that big block in there in the first place..

Actually dropped in with the trans first shot. Did have to take the steering box out to get the header up on the d/side I do remember. Forgot how the hell I tightened them though!

 

[halifaxhops]

That's right I forgot about that. 383

 

[halifaxhops]

I was seriously thinking of hammering the back of the cover down last night but ran out of beer. Ron was over for a bit!

 

[zkx14]

Tell you what the trunk is going from a 4 body to a one body quick putting all the stuff back there.

Got too much junk in your trunk?

 

[MOPARMITCH]

I had a Guy over here doing some outside paint work around the property for the last three days. I HATE to paint. He pointed out some rotton brick moldings around the overhead doors. So... Yesterday and the day before, I spent pullin off all the moldings and replacing with PVC moldings. 120 feet worth of moldings.

 

[halifaxhops]

Now I do for Shure and some have sharp corners!

 

[halifaxhops]

I hate paint also, have got to do the deck here soon been weathered enough.

 

[ScampMike]

it just

Got too much junk in your trunk?

and not enough holes..

 

[MOPARMITCH]

Hey ... You electrical experts... Talk to me about using LED tubes in my overhead light units...

 

[zkx14]

I had a Guy over here doing some outside paint work around the property for the last three days. I HATE to paint. He pointed out some rotton brick moldings around the overhead doors. So... Yesterday and the day before, I spent pullin off all the moldings and replacing with PVC moldings. 120 feet worth of moldings.

You need to change the line under your screen name to "I've Got a Guy.."

 

[MOPARMITCH]

You need to change the line under your screen name to "I've Got a Guy.."

That would truly be Ghey !!

 

[halifaxhops]

Mitch Stan is the man there. That's what he does want his # Hell he would be your guy for it!

 

[zkx14]

Keith Stan is the man there. That's what he does want his #

???

 

[ScampMike]

Hey ... You electrical experts... Talk to me about using LED tubes in my overhead light units...

they would be brighter... ok, I'm done

 

[halifaxhops]

I do know they are not cheap at all around 75 each bulb.

 

[halifaxhops]

Changed it LOL

 

[MOPARMITCH]

Mitch Stan is the man there. That's what he does want his # Hell he would be your guy for it!

I think I know what to do, but was looking for other opinions/advise.. I have 20 4 bulb units, so 80 tubes. A Guy gave me a trash can full of T8 bulbs from a commercial building a few years ago. So i went in each unit then, and replaced the old style ballasts with a single electronic one. And then of course used the T8 bulbs. Butt they were used and many of them are out now. I have been told that I can use LED tubes that are compatable with those electronic ballasts. Or, I would have to remove all the ballasts and wire them direct, to use the other style of LED tubes ??

 

[ScampMike]

I think I know what to do, but was looking for other opinions/advise.. I have 20 4 bulb units, so 80 tubes. A Guy gave me a trash can full of T8 bulbs from a commercial building a few years ago. So i went in each unit then, and replaced the old style ballasts with a single electronic one. And then of course used the T8 bulbs. Butt they were used and many of them are out now. I have been told that I can use LED tubes that are compatable with those electronic ballasts. Or, I would have to remove all the ballasts and wire them direct, to use the other style of LED tubes ??

google is your friend here bud..