Stop in for a cup of coffee

-
Hops your mission if you choose to accept it is to convert Ron to the good side. Hey what was he spraying on the frame?
 
I will have to look Mitch I don't have a rack for that but I do have a rack (I think)and all you need to do it move the mount tabs
 
Degreaser, the frame is in the shop and we are pulling it apart to restore it. Have to knock off the dirt and surface rust then he will paint it. Hey the rule is who evers car is in the shop buys the beer, since half his car is here guess it is half rations!
Trust me he knows my car. He is the only other person that can start it.
 

I will have to look Mitch I don't have a rack for that but I do have a rack (I think)and all you need to do it move the mount tabs
I actually do have the front upper rack...just have to bend it back some... Really need the headlight stuff and front push bar / headlight surrond bar and brackets...
Oh.. and a good seat ...or I'll recover this one..
 
Depends what you mean he works on anything but is doing the Monte for his wife. Dam he pretty much built my car with me.
 
Hell If I did not buy the dart for my daughter I would prob be messing around with another Aerocoupe.
 
my plow truck is an 83 GMC 3/4 ton fleetside with 350 AT and I found an 84 GMC stepside 1/2 ton 350 manual - - I am considering buying the 84 and making it into a 3/4 ton AT - - it's probably a **** load more work than it is worth though...
 
May everyones Sunday be a goodone, memikie has got to get moving out of this chair, check on something to eat ! seeyea's later :thumbsup:
 
I once changed a 78 Trailduster to a 3/4 suspension... hummmm.. I could just take the front and rear out of the 3/4 and jam it up under the 1/2..
 
-
Back
Top Bottom