Stop in for a cup of coffee

-
LOL, just saw Mitchs post. I read yours earlier. Guess Shop and Stop look the same before not enough coffee. lol
could be worse though. Have seen many times guys answering questions in the wrong thread. oops :BangHead:
Oh well I finally got my mopar garage done, wanna see pics?
 
Hey .. Where's Keith ? I got a problem with my heat in the shop this morning. Turn up the T stat...I can see/hear the LPG furnace run... But no fan... and then of course furnace times out because of no fan.. Ideas ?? @zkx14
 

IMG_0204.JPG
 

All i can afford lol


I do think it's funny that each of my 2 kids have selected their own mopar hot wheels out of literally hundreds of cars, my daughter chose a 68 cuda and my son has been attached too and will not let out of his grip a 70 challenger r/t
 
Hey .. Where's Keith ? I got a problem with my heat in the shop this morning. Turn up the T stat...I can see/hear the LPG furnace run... But no fan... and then of course furnace times out because of no fan.. Ideas ?? @zkx14
Don't have much exp with gas fired, but sound like that part is working. Do you have a way to turn the fan on by itself to check the motor? 'fan only' or circulate mode?
 
Hey .. Where's Keith ? I got a problem with my heat in the shop this morning. Turn up the T stat...I can see/hear the LPG furnace run... But no fan... and then of course furnace times out because of no fan.. Ideas ?? @zkx14
a few years ago our furnace would start and run, but quit when the fan failed to start - we had a dead bat caught in it...
 
a few years ago our furnace would start and run, but quit when the fan failed to start - we had a dead bat caught in it...
Depending where it's at, it doesn't take much to shut down a gas one. especially newer models. A friend recently had problem - kept shutting off. He had service out to check. From what he told me, bugs (probably stinkbugs) were in the exhaust and apparently it sensed the reduced flow. That wouldn't stop the circulator from running up till it all shut off though.
 

Don't have much exp with gas fired, but sound like that part is working. Do you have a way to turn the fan on by itself to check the motor? 'fan only' or circulate mode?

a few years ago our furnace would start and run, but quit when the fan failed to start - we had a dead bat caught in it...

Depending where it's at, it doesn't take much to shut down a gas one. especially newer models. A friend recently had problem - kept shutting off. He had service out to check. From what he told me, bugs (probably stinkbugs) were in the exhaust and apparently it sensed the reduced flow. That wouldn't stop the circulator from running up till it all shut off though.
Workin at it now.. I think board went. or the Blower Motor itself..Still diggin in...
 
Hey .. Where's Keith ? I got a problem with my heat in the shop this morning. Turn up the T stat...I can see/hear the LPG furnace run... But no fan... and then of course furnace times out because of no fan.. Ideas ?? @zkx14
Check the thermocouple, it senses the heat gain and starts the fan. Sometimes you can clean it and it will help.
 
-
Back
Top Bottom