Stop in for a cup of coffee

[Ddaddy]

Bombed? I like...oh wait, that's not me...that's Ben...

 

[Ddaddy]

Well, the parts are in the trunk of the GTS for the trip to the Speed Shop tomorrow morning. New .920 MP torsion bars, new MP retaining clips and boots, new torsion bar adjusters and a TB removal tool. I also got new LCA rebound bumpers to replace the cracked and broken factory ones.

I am also officially on vacation until Tuesday! Whoohoo!

 

[straightlinespeed]

Sounds perfect!

 

[No name needed]

Maybe I should go Bowlin? That'd be fun![/

At least stop by.

 

[Ben Drinkin]

Well, the parts are in the trunk of the GTS for the trip to the Speed Shop tomorrow morning. New .920 MP torsion bars, new MP retaining clips and boots, new torsion bar adjusters and a TB removal tool. I also got new LCA rebound bumpers to replace the cracked and broken factory ones.

I am also officially on vacation until Tuesday! Whoohoo!

Then you should take Mike Bowlin! It'd be a great time..

 

[Ben Drinkin]

Moh-K. I'll talk car stuff... i made a frame to hold an engine and trans, kframe and all... good place to keep stuff, can test-fire/break-in an engine.. anyhoo, i guess i was drinkin too much and forgot what i waz doing. I welded some casters on it so i could move it around.. had some small (furniture dolly style) casters so i welded them to the frame (work OK at best, but so short that cherry picker cant in where it needs to be).. fast forward a few months, I'm cleaning up crap in the goorage, i come across a box.. inside are two fixed and two swivel 6" casters! What do you think i got those for? My drunk ***! Now i get to do some cutting and rewelding..

 

[straightlinespeed]

Moh-K. I'll talk car stuff... i made a frame to hold an engine and trans, kframe and all... good place to keep stuff, can test-fire/break-in an engine.. anyhoo, i guess i was drinkin too much and forgot what i waz doing. I welded some casters on it so i could move it around.. had some small (furniture dolly style) casters so i welded them to the frame (work OK at best, but so short that cherry picker cant in where it needs to be).. fast forward a few months, I'm cleaning up crap in the goorage, i come across a box.. inside are two fixed and two swivel 6" casters! What do you think i got those for? My drunk ***! Now i get to do some cutting and rewelding..

Well at least you always have something to do right? LOL

 

[No name needed]

Moh-K. I'll talk car stuff... i made a frame to hold an engine and trans, kframe and all... good place to keep stuff, can test-fire/break-in an engine.. anyhoo, i guess i was drinkin too much and forgot what i waz doing. I welded some casters on it so i could move it around.. had some small (furniture dolly style) casters so i welded them to the frame (work OK at best, but so short that cherry picker cant in where it needs to be).. fast forward a few months, I'm cleaning up crap in the goorage, i come across a box.. inside are two fixed and two swivel 6" casters! What do you think i got those for? My drunk ***! Now i get to do some cutting and rewelding..

Zounds!! I hate rework

 

[Ben Drinkin]

Well at least you always have something to do right? LOL

I suppose... I'd still rather have a 20 year old coed with daddy issues... that would be something to do!

 

[Ben Drinkin]

Zounds!! I hate rework

Rework because you were stoopid is the worst! And i have often been stoopid!

 

[straightlinespeed]

I suppose... I'd still rather have a 20 year old coed with daddy issues... that would be something to do!

I'll go with a bit older... I dated some 20 yr olds while in my 30's. I wanted to jump off a bridge from listening to them talk about all their problems. So I'll take 28+ LOL

 

[dukeboy440]

I'll go with a bit older... I dated some 20 yr olds while in my 30's. I wanted to jump off a bridge from listening to them talk about all their problems. So I'll take 28+ LOL

Gotta at least be 25 minimum for me.

 

[No name needed]

Wolfies number one rule on women.

Never ask a woman eating ice-cream out of the box how her day is.
Run if it's Chocolate.

 

[MomsDuster]

Moh-K. I'll talk car stuff... i made a frame to hold an engine and trans, kframe and all... good place to keep stuff, can test-fire/break-in an engine.. anyhoo, i guess i was drinkin too much and forgot what i waz doing. I welded some casters on it so i could move it around.. had some small (furniture dolly style) casters so i welded them to the frame (work OK at best, but so short that cherry picker cant in where it needs to be).. fast forward a few months, I'm cleaning up crap in the goorage, i come across a box.. inside are two fixed and two swivel 6" casters! What do you think i got those for? My drunk ***! Now i get to do some cutting and rewelding..

Got any pictures? Of the frame?

 

[toolmanmike]

Well, I can confirm that the Mopar Performance torsion bars have the same numbers on both ends of each bar (plus an R or L to indicate which side they go on) and there is no apparent difference between each end. I put them side by side and flipped one and there was no change in the orientation of the end in either direction.

That's good to know. I was just chasing the noise and noticed the one torsion bar was in backwards compared to the other. I didn't grease the sockets either. I may have to install a couple new ones and grease the sockets.

 

[Ben Drinkin]

I'll go with a bit older... I dated some 20 yr olds while in my 30's. I wanted to jump off a bridge from listening to them talk about all their problems. So I'll take 28+ LOL

Stimulating conversation is NOT high on the list of qualities im going for!

 

[halifaxhops]

Wow If can get a scampy sig on the magmet I can get 30% more! You game m3? it is a left hand log nut fpr a
buck!

 

[No name needed]

I'll go with a bit older... I dated some 20 yr olds while in my 30's. I wanted to jump off a bridge from listening to them talk about all their problems. So I'll take 28+ LOL

Only takes a pillow over her face to solve all those problems.
I told my wife once. If you really loved me you would have married someone else.

 

[Ben Drinkin]

Got any pictures? Of the frame?

Just a square tube frame... nuttin fancy.. just put really small casters on it.

 

[halifaxhops]

Chewing gum with Stitch heal works also!

 

[Ben Drinkin]

I told my wife once. If you really loved me you would have married someone else.

You're an absolute genius! If only i had your brains.. and someone else's looks!

 

[MomsDuster]

Just a square tube frame... nuttin fancy.. just put really small casters on it.


View attachment 1715038347

Nice, I'm looking to do something like that.

 

[Princess Valiant]

Just a square tube frame... nuttin fancy.. just put really small casters on it.


View attachment 1715038347

you need to put a seat on that and some wheels

 

[Ben Drinkin]

Nice, I'm looking to do something like that.

Casters are the biggest cost.. I'm still looking for some cheap (i.e. free) gauges to put in a 'control panel'..

 

[No name needed]

You're an absolute genius! If only i had your brains.. and someone else's looks!

Trust me. You don't want my looks.