Stop in for a cup of coffee

[krazykuda]

Wow guess it is right. Wonder how the area between the valves holds up?

I've never had a problem...

On my 318 that I used as a daily driver, I installed 360 heads with 1.88" intakes with a fresh valve job.... Drove it over 150 k, then had valve job done with 2.02" intakes and drove the engine another 150 k miles... No problem with the heads or valves...

 

[memike]

Are you getting close , Me Mike ? (V8 swap ,I meant... Watching You Tube ,with "1971 '.s Le Man's " Steve McQueen now .. It was,deleted ... I punch in , "Pontiac 400 builds" ..I get one of my favorite movies , back. Go figure.

Here is where I am 1966 Valiant Sedan V8 Swap (Victoria)

 

[krazykuda]

OMG You and Karl , I must be more careful how I post and what words to NOT use

It's not necessarily what words you use.... It's what order that you use them....

It's fun to twist the meaning when it can be taken more than one way...


Example:

No punctuation:
**** I know him I know him he used to come over to our house and eat chicken **** I know him....

Some punctuation:
****, I know him, I know him. He used to come over to our house and eat chicken ****, I know him....

Full punctuation:
****, I know him, I know him. He used to come over to our house and eat chicken, ****, I know him....

 

[halifaxhops]

Getting there, let me find my resto thread for you.

OMG Karl , I must be more careful how I post and what words to NOT use

With this thread any word is dangerous!

 

[memike]

My teacher !!! Thank you Karl

 

[memike]

With this thread any word is dangerous!

Agree ! so ! if I go hunting and bag a deer, do I need to be very careful how I cut him/her ?

 

[halifaxhops]

Agree ! so ! if I go hunting and get a deers bag, do I need to be very careful how I cut him/her ?

Lol SEE!

 

[krazykuda]

If you see Richard hobbling down the street, do you call him Limp Dick????

 

[halifaxhops]

LOL you said limp! (bet you thought I was going to post DICK didn't ya!)

 

[krazykuda]

If you see a homeless man limping down the street, you could say that he has a bum leg....

 

[Mopar-Man]

So my dash has been sitting here in primer for a couple months and I just can't decide what to do with it. I was going to paint it 3 stage black pearl but thought it would be too shiny AND you would never see the pearl inside a car! Then I was gonna vinyl wrap it but some of the curves would require stretching and a heat gun and may not look good on the edges. Then it hit me... why not do a Plastidip wrap? It will be dull enough not to reflect; black in color; and best of all FEEL like vinyl and not hard like metal. What do you guys think?

 

[halifaxhops]

Or why is the woman with the wooden leg always called Peg?

 

[memike]

If you see Richard hobbling down the street, do you call him Limp Dick????

Are you saying Dick is short for Richard (Robert = Bob) this will be good

 

[halifaxhops]

So my dash has been sitting here in primer for a couple months and I just can't decide what to do with it. I was going to paint it 3 stage black pearl but thought it would be too shiny AND you would never see the pearl inside a car! Then I was gonna vinyl wrap it but some of the curves would require stretching and a heat gun and may not look good on the edges. Then it hit me... why not do a Plastidip wrap? It will be dull enough not to reflect; black in color; and best of all FEEL like vinyl and not hard like metal. What do you guys think?

Good call there!

 

[krazykuda]

Agree ! so ! if I go hunting and bag a deer, do I need to be very careful how I cut him/her ?

Doh...

I mean doe....

I'll give you a buck for that doe...

 

[halifaxhops]

Are you saying Dick is short for Rick (Rick= Ben) this will be good

 

[memike]

So my dash has been sitting here in primer for a couple months and I just can't decide what to do with it. I was going to paint it 3 stage black pearl but thought it would be too shiny AND you would never see the pearl inside a car! Then I was gonna vinyl wrap it but some of the curves would require stretching and a heat gun and may not look good on the edges. Then it hit me... why not do a Plastidip wrap? It will be dull enough not to reflect; black in color; and best of all FEEL like vinyl and not hard like metal. What do you guys think?

I have never used the plastidip, what the heck is it, do you have a picture of this stuff ?

 

[krazykuda]

Are you saying Dick is short for Richard (Robert = Bob) this will be good

You said dick is short....

 

[halifaxhops]

The name Rick is an English baby name. In English the meaning of the name Rick is: Abbreviation of Richard 'powerful; strong ruler.' Also a , meaning gifted ruler, people ruler, aOld German Theodoric.

 

[halifaxhops]

You said dick is short....

LOL you said short!

 

[Tooljunkie]

So a girl with one leg shorter than the other is eileen,if she’s asian then its irene....

 

[Abodybomber]

You said dick is short....

So his buddy..Fellow is long....? His cousin is Buck Naked ..? Would love to see that family linage..

 

[Mopar-Man]

I have never used the plastidip, what the heck is it, do you have a picture of this stuff ?

I don't have it and have never used it. I will practice on some scrap metal before I do the dash. They have spray and cans. You can use a roller to get a texture! All controlled by the nap. I am thinking 3 inch foam roller but need to experiment. I will take pics and post them later. I believe they sell it at Lowes or Home Depot but I need to go to the store.

 

[halifaxhops]

I don't have it and have never used it. I will practice on some scrap metal before I do the dash. They have spray and cans. You can use a roller to get a texture! All controlled by the nap. I am thinking 3 inch foam roller but need to experiment. I will take pics and post them later. I believe they sell it at Lowes or Home Depot but I need to go to the store.

You said Nap!

 

[krazykuda]

So his buddy..Fellow is long....? His cousin is Buck Naked ..? Would love to see that family linage..

Like the Schitt family, do you know Jack Schitt???