Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
zkx14
Duster De-ruster
Yeh, high on price, but if it runs good where its at, might be easier to sell, Once they are pulled I agree the value is core at best cause you can't prove it's good. I could see that happening for maybe half the money.
I guess I could measure them tonight. I have a 318 LA lifter set sitting on the shelf too. Just pull one out quick from one of the Poly's
‘65 /6,trans driveshaft and 7-14” for 400. So yes,half the money.
The poly is solid, the la hyd.
correct. but the main thing is if the bore size if the same and the length is the same, then i should be able to use the aftermarket solid lifters from an LA.
Unconventional
Well-Known Member
The man's got a plan. Let's frisk'im
And the oil ring, not the correct name for it. Where the oil passage intersects the lifter.
hmmm here's a pic supposedly of a poly lifter. I know that's different than the LA's I have
Egge Valve Lifter
Unconventional
Well-Known Member
Looking at that app chart .. Would that not be the one for ANY LA motor using a solid lifter cam and adjustable valve gear?
zkx14
Duster De-ruster
ummmm. they show exact same for 225 slanty
zkx14
Duster De-ruster
and that right there is some scary **** all by itself.
hmmm hmm interesting. I can't find any mention of people not being able to find any so I bet they are the same then.
hehe.. I do have a couple turbos laying around....and that right there is some scary **** all by itself.
zkx14
Duster De-ruster
here is what I have. doesn't look quite right and you prob have same junky foam in the other connectors. You are welcome to it, but I am sure DMT has the right one and probably under $10... These were extra in full body gasket set. So I would guess I already used the exact correct ones that you need.
Way to Keefer... killed the thread
zkx14
Duster De-ruster
Not me. Been kinda slow in here from the start today. And time to drive for me. Sneeze ya later.
Last edited:
It is known as a dumb bell lifter. The same as a original 273 lifter.
They look like ones I took out of my 65 poly 318. It appears they are replacement lifters for /6 and 273's and probably poly 318's too.
Nice!!. for 3 bucks a piece, that's a good deal too. 48 bucks total. sure beats 224
Rock auto might have them for less....
they do. Toolman found them for me 3.03 a piece
I Started there and looked them up by application but no dice. When I found the part number I wnt back and typed that in search and they came up. I bet those are the same as the HP273 lifters If I remember correctly.
According to the cam company, they said they usually get requests to custom grind cams as hydraulic cams for the polys.
So what lifter does the cam company suggest for there camshafts?
-
Similar threads
