Ddaddy
Just doing what I do
Nope, they are stock 2.25” only. Anything bigger and you need to use a universal aftermarket hanger like these.
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
straightlinespeed
Sometimes I pretend to be normal
Gotta be cheaper than the $80 TTI wants for there hangers. Thats what I got on my car now and it works, I just wasnt sure if there was something better? Gotta find a place to buy those from.
The Universal ones are very cheap... I have sold them, by the thousands, over the years....
Any GOOD Auto Parts Store... I think they even have them at Autoclone and Gagvance......
Ddaddy
Just doing what I do
They are between $5-10 from most auto parts places like Napa, Advance, O’reilly’s, etc.
Advance Auto Parts - Down for Maintenance
It was good. I should have taken a picture. He had a little battery operated blower with a bowl for the wood chips and a hose to go in the drink. He lit the bowl and filled the glass above the liquor and capped it with a coaster to keep the smoke inside.
Unconventional
Well-Known Member
A little belting material, a Stanley razor knife, power drill and bits or a belt punch if you prefer and some creativity 
Exhaust hangers
Exhaust hangers
Unconventional
Well-Known Member
I made that mention to the bartender. He just snickered! LOLSounds like bong wateror however that's spelled
Unconventional
Well-Known Member
That's how they make CBD infused coffee! It must be!
Ddaddy
Just doing what I do
Back when I used to do a lot of camping, we would occasionally put a hickory or maple stick in the camp fire and get it charred and smoking an then just dip it into our bourbon glass quickly then remove it. It added a nice flavor.
Unconventional
Well-Known Member
DIY CBD infused Coffee Maker
Company motto .. It may still hurt. But you won't give a rat's behind.
Apparently, many of these Cadys have an issue with the headlamp capsules. I had a Mother's kit in the cabinet, so I broke it out and tried it. I have done similar, in the past , by wetsanding and so forth. But I was very pleased with the results from this little kit
Ddaddy
Just doing what I do
I used one of those kits on my wife’s ‘05 Grand Caravan. It worked well. The sealer has held up for several years now and the lenses still look good.
Unconventional
Well-Known Member
Major improvement
straightlinespeed
Sometimes I pretend to be normal
Hi Tim!
- Joined
- Mar 17, 2018
- Messages
- 17,152
- Reaction score
- 41,892
Man after my own heart, no not that way Karl! Hah! TMM you going to make Omaha? I am gauging what kind of single malt to bring!
- Joined
- Mar 17, 2018
- Messages
- 17,152
- Reaction score
- 41,892
And just know we all have bong water stories!A little belting material, a Stanley razor knife, power drill and bits or a belt punch if you prefer and some creativity
Sorry, can't make it.
- Joined
- Mar 17, 2018
- Messages
- 17,152
- Reaction score
- 41,892
Bummer! I will step down the single malt a notch or two then! Save the righteous stuff for MITP!
Unconventional
Well-Known Member
@Sublime one Get that 150ton bottom hopper back on the rails?
- Joined
- Mar 17, 2018
- Messages
- 17,152
- Reaction score
- 41,892
Not yet, we are on restricted road issues. 8 thousand in permits just to move 175T crane thru town. Add 4 semis worth of counter balance and we will try and pick it up this Friday. At this point looking like about a 40,000 dollar mistake.
zkx14
Duster De-ruster
oops
Hi Tim
-
Similar threads
