Stop in for a cup of coffee

[Unconventional]

Damn that smells good!
Mornin!

View attachment 1715643384

Good idea splains why the cat is so whiney .. He hasn't had his latte yet

 

[FISHYPETE]

Good morning

 

[toolmanmike]

It's morning. Coffee is done.

 

[Unconventional]

I was too trusting of the NWS this morning and their reported current temp. There's frost out there!

 

[Sublime one]

Just a great winters day up here on the Tundra this morning. Cold but no snow or wind! I’ll take it. I got to go back up under dash today and sort out some plumbing. Arghh.

 

[FISHYPETE]

We’ve been having decent weather above normal temps. I have a feeling winter will come on strong when it arrives

 

[zkx14]

Just a great winters day up here on the Tundra this morning. Cold but no snow or wind! I’ll take it. I got to go back up under dash today and sort out some plumbing. Arghh.

Plumbing? Got a still in there or sumptin?

 

[Unconventional]

The Molson tap built into the dash board

 

[zkx14]

The Molson tap built into the dash board

I'm thinking more like this...

 

[Bobacuda]

View attachment 1715643378

That’s where the rubber hits the road!

 

[toolmanmike]

I'm thinking more like this...
View attachment 1715643398

Wrong on many counts. Teflon instead of rubber. It better be stainless steel with teflon for thread sealant. Copper and not brass.
Good way to ruin a bottle of Scotch! LOL

 

[Unconventional]

Wrong on many counts. Teflon instead of rubber. It better be stainless steel with teflon for thread sealant. Copper and not brass.
Good way to ruin a bottle of Scotch! LOL

You just have to take the time to drain the plumbing .. Sorta like winterizing the hot rod

 

[zkx14]

Wrong on many counts. Teflon instead of rubber. It better be stainless steel with teflon for thread sealant. Copper and not brass.
Good way to ruin a bottle of Scotch! LOL

always a critic. lol. Theres a lot more that looks wrong to me... Why would you need crossover valves? and looks like copper water lines down the back - don't even see a valve in them??? But it looks cool.

 

[toolmanmike]

always a critic. lol. Theres a lot more that looks wrong to me... Why would you need crossover valves? and looks like copper water lines down the back - don't even see a valve in them??? But it looks cool.

Yes it does look cool and someone did quite a pluming job to put it together. Just stating facts on the things wrong.

 

[Unconventional]

always a critic. lol. Theres a lot more that looks wrong to me... Why would you need crossover valves? and looks like copper water lines down the back - don't even see a valve in them??? But it looks cool.

With a Kahlua, a Baileys, and a Frangelico, with the proper jetting you could make a One Touch Nutty Irish Priest

 

[zkx14]

Yes it does look cool and someone did quite a pluming job to put it together. Just stating facts on the things wrong.

Someone is actually selling them on Etsy for $499. But there is only 1 left, so get your order in soon. LOL

 

[toolmanmike]

Someone is actually selling them on Etsy for $499. But there is only 1 left, so get your order in soon. LOL

LOL No thanks, I pour mine out of glass into glass.

 

[Tooljunkie]

With a Kahlua, a Baileys, and a Frangelico, with the proper jetting you could make a One Touch Nutty Irish Priest

Or you could make an irish priest nutty with one touch..
Ah, what do i know? i dont touch the stuff.

 

[dukeboy440]

 

[krazykuda]

That’s where the rubber hits the road!

What do you do with 365 used condoms???

Melt them down and call it a Goodyear...

 

[dukeboy440]

Or you could make an irish priest nut with one touch..

TMI

 

[Unconventional]

View attachment 1715643455

CALTRANS at work

 

[Tooljunkie]

In case y’all’s wonderin, i took the day off. Dunno why. Well, i do know. Floor panel needs work and im putting it off. I have to remove it. And remove pedals. And weld and grind and paint and...

 

[Unconventional]

So ya likes pistachios? Do ya?

 

[zkx14]

So ya likes pistachios? Do ya?

???