Stop in for a cup of coffee

-
Got replacement wheel today. You know, for the replacement. Guess what. Same as the second wheel. 1/4 inch difference back spacing. So going to keep the two wrong wheels. They match. And send back the wheel that matches the back ones. The correct ones. Then the rear will match and the front will match. But front will not match the rear. Got it?:realcrazy::BangHead::bs_flag:


Order a couple more and see what they send you, before sending them back.... :rolleyes:

You may get the one that you need...
 
So translated what we know for sure is Chris shaft is to small right? And he can’t find the correct bushing to adapt to his small shaft? Then his HF death wheel explodes on him but he always wears protection when he is using his small shaft tool!


At least they make condoms in Chris' size... :lol:

small_pecker_condoms.jpg
 
Wah, wah, wah.... My p*ssy hurts too.... :poke:

Maybe you should get a shop before finishing the cars... :realcrazy:
That’s in the works. It was never an issue when i was the sole renter of this shop for many years, when I started the dart.
 
Geez Karl, did you have a bad day at work?


Nah... Haven't been on much lately and I have to get it out of my system...

Plus OMR is back and I have to compete with him on who goes the farthest...


If some of the posts are too harsh, feel free to delete them...
 
Nah... Haven't been on much lately and I have to get it out of my system...

Plus OMR is back and I have to compete with him on who goes the farthest...





If some of the posts are too harsh, feel free to delete them...

No worries from me I've mellowed of late. :rolleyes:
 
Nah... Haven't been on much lately and I have to get it out of my system...

Plus OMR is back and I have to compete with him on who goes the farthest...


If some of the posts are too harsh, feel free to delete them...
That’s okay, sometimes going it raw is best
 

Maybe you should get a shop before finishing the cars... :realcrazy:
I will add this one last bit. I tried that whole waiting until I have a shop of my own thing. That cost me 6 years of waiting while I saved up only for a lay off to eat those funds. Meanwhile, I could have had the dart finished if I’d just worked on it like I have been the last few months.

“Work with what you have available or it’ll never get done” Ian Roussel.
 
I will add this one last bit. I tried that whole waiting until I have a shop of my own thing. That cost me 6 years of waiting while I saved up only for a lay off to eat those funds. Meanwhile, I could have had the dart finished if I’d just worked on it like I have been the last few months.

“Work with what you have available or it’ll never get done” Ian Roussel.
Get Er' Done.... :thumbsup::thumbsup:
 
Wow 15 million J&J vaccines found to been mixed wrong and thus contaminated
 
Not getting it anyway so of no concern to me.
Although I'm not surprised.
Same why I’m not getting it. Just too much rush rush rush. I’ll get it eventually just not right now.

so are you still down south or back up north?
 
Geez Chris. Just stop! If you watch the news you already know it.
What’s political in that? And actually no, I wasn’t watching news. Our county health department sent out a text alert
 
Last edited:
Hey! Im back! Was a gruelling day, chasing gremlins. The ranchero has battery circuits on solenoid as well as a terminal block. Low beam shows a 2 volt drop from battery. I guess, its running power through multiple circuits,about 30 feet of wire. Fixed that. Cornering lamps inop, both. Who would have thought both sockets are bad? Not me!
So, started over and tested sockets. Both are bad. Fixed!
Alternator doesent go to 15 volts with headlights on any more either. One full day to sort this stuff out. But i cant isolate where the acc circuit is always live. Wiring diagrams are hard to find.
 
Hey! Im back! Was a gruelling day, chasing gremlins. The ranchero has battery circuits on solenoid as well as a terminal block. Low beam shows a 2 volt drop from battery. I guess, its running power through multiple circuits,about 30 feet of wire. Fixed that. Cornering lamps inop, both. Who would have thought both sockets are bad? Not me!
So, started over and tested sockets. Both are bad. Fixed!
Alternator doesent go to 15 volts with headlights on any more either. One full day to sort this stuff out. But i cant isolate where the acc circuit is always live. Wiring diagrams are hard to find.
Ugh I’d rather deal with a seized engine than chase electrical gremlins. Don’t envy ya here
 
Ah those things happen from time to time. Man it’s gonna get down to 26 here tonight

Weather fools screwed up here as per usual.
Can't believe anything they say.
As for my little friend. Last 3 times I've left her house sit. Two fires, and recently decided for what reason I still don't understand.
Cleaned the house oil heater.
Management to cause a leak in line from heater to chimney.
Lucky she's not dead. " Gee I don't know why your upset, I called and told you it was making a funny noise and I turned it off" :elmer:
 
Weather fools screwed up here as per usual.
Can't believe anything they say.
As for my little friend. Last 3 times I've left her house sit. Two fires, and recently decided for what reason I still don't understand.
Cleaned the house oil heater.
Management to cause a leak in line from heater to chimney.
Lucky she's not dead. " Gee I don't know why your upset, I called and told you it was making a funny noise and I turned it off" :elmer:
:eek:
 
-
Back
Top Bottom