Stop in for a cup of coffee

[WV64Signet]

See, i have read good and bad about them... makes me leary.. honestly of doing the whole car, doing the brake lines stresses me the most for some reason I think Inline is like 10 miles away from me also..

I replaced the entire brake system from front to rear... Zero issues and I didn't know anything from anything about how to do it when I started.

I think where guys get jammed up is where the cars been modified in some way. The lines are form fitting to stock axle, frame and engine.

 

[halifaxhops]

Yes they are. The only thing I might have been able to use would have been the rear metal line and a flex to the axel. No way on the rest.

 

[zkx14]

Squirrels and Allens

Or alien squirrels. Good Morning.

 

[fatoldguy]

Morning .

 

[halifaxhops]

Like a duck in a Chinese market there!

 

[Icetech]

Morning .

View attachment 1716074351

OMG.. i hate you

 

[halifaxhops]

yeah PST is a no go for sure.. select options for a base '62 conversion.. manual disc and it ends up at $1200.. that's insane. Thats the kit using adapter plates and bolt on calipers.. no option for stock spindle/slider calipers

No te front end bushings, ball joints etc.

 

[Icetech]

No te front end bushings, ball joints etc

I'm looking at brake conversion right now.. gonna order the front end rebuild kit from drdiff when his site works again

 

[zkx14]

I have never done the lowers, i was going to try the trick of welding a washer into the bushing and using a press to pop them out

Fun Stuff. No press...

Cinnamon 75 Duster \

 

[Sublime one]

Yesterday I finally got around to fabricating and setting our fancy sign out on the road. Our acreage covers a couple of different driveways that I allow neighbor to use to get to his place. It makes the UPs and Fed X drivers crazy with their apps. Signage helps students as well get to correct drive. Blair Creek runs beside the road and only a couple of places to cross. Thus the confusion. My Dad helped me. I had to do some creative millwright rigging to accomplish. Basically lifted it up and tilted forward stabbing the posts in the holes.

 

[halifaxhops]

And the deal of the day is

1965 Mustang Fastback Project​

$4,500$4,800
Listed 6 weeks ago in Reading, PA


Door pickup

Message

Details​

• Condition
  Used - Fair

1965 fastback C code stamped No title. White bottom half and two roof sections. $4800 What you see is what you get.

 

[WV64Signet]

Yesterday I finally got around to fabricating and setting our fancy sign out on the road. Our acreage covers a couple of different driveways that I allow neighbor to use to get to his place. It makes the UPs and Fed X drivers crazy with their apps. Signage helps students as well get to correct drive. Blair Creek runs beside the road and only a couple of places to cross. Thus the confusion. My Dad helped me. I had to do some creative millwright rigging to accomplish. Basically lifted it up and tilted forward stabbing the posts in the holes.

View attachment 1716074360

View attachment 1716074361

View attachment 1716074362

Looking good there John. Nice

 

[halifaxhops]

Yesterday I finally got around to fabricating and setting our fancy sign out on the road. Our acreage covers a couple of different driveways that I allow neighbor to use to get to his place. It makes the UPs and Fed X drivers crazy with their apps. Signage helps students as well get to correct drive. Blair Creek runs beside the road and only a couple of places to cross. Thus the confusion. My Dad helped me. I had to do some creative millwright rigging to accomplish. Basically lifted it up and tilted forward stabbing the posts in the holes.

View attachment 1716074360

View attachment 1716074361

View attachment 1716074362

Love it!

 

[WV64Signet]

And the deal of the day is
View attachment 1716074363

1965 Mustang Fastback Project​

$4,500$4,800
Listed 6 weeks ago in Reading, PA


Door pickup

Message

Details​

• Condition
  Used - Fair

1965 fastback C code stamped No title. White bottom half and two roof sections. $4800 What you see is what you get.

LoL. The "Bring a Shovel " site.

 

[WV64Signet]

What's a reasonable cost to get a set of steel wheels sandblasted?

 

[Sublime one]

And the deal of the day is
View attachment 1716074363

1965 Mustang Fastback Project​

$4,500$4,800
Listed 6 weeks ago in Reading, PA


Door pickup

Message

Details​

• Condition
  Used - Fair

1965 fastback C code stamped No title. White bottom half and two roof sections. $4800 What you see is what you get.

Only way that makes sense is if the trailer it is on goes with!

 

[Sublime one]

What's a reasonable cost to get a set of steel wheels sandblasted?

Total guess here but likely 150 bucks? Based on two hours of work? Thirty minutes per wheel?

 

[toolmanmike]

And the deal of the day is
View attachment 1716074363

1965 Mustang Fastback Project​

$4,500$4,800
Listed 6 weeks ago in Reading, PA


Door pickup

Message

Details​

• Condition
  Used - Fair

1965 fastback C code stamped No title. White bottom half and two roof sections. $4800 What you see is what you get.

Condition: Fair

 

[toolmanmike]

Total guess here but likely 150 bucks? Based on two hours of work? Thirty minutes per wheel?

Yep. I was going to say $100 but I was thinking back 10+ years.

 

[WV64Signet]

Total guess here but likely 150 bucks? Based on two hours of work? Thirty minutes per wheel?

Trying to decide if I'm better off just getting a HF system and doing it myself.

Local guy says 90-125 each blasted and painted

 

[Icetech]

Trying to decide if I'm better off just getting a HF system and doing it myself.

Local guy says 90-125 each blasted and painted

Look for a powder coating shop.. they have to pretty much blast everything they do, most will just blast for a price if you ask

 

[toolmanmike]

Look for a powder coating shop.. they have to pretty much blast everything they do, most will just blast for a price if you ask

Most welding shops do too.

 

[zkx14]

Only way that makes sense is if the trailer it is on goes with!

Probably won't be much left if you switch it onto another trailer anyway. LOL

 

[Icetech]

bored at work flipping through new TV shows.. and there is a grease show.. and it's really not good...

 

[halifaxhops]

Eye candy