Stop in for a cup of coffee

-
www.forabodiesonly.com

8 1/4 rear and jeep brakes!

Hey all just received the hard parts from a 98 grand Cherokee rear disk brakes. Dana 35. Super easy to adapt to a 8 1/4 you just have to enlarge the axel tube hole and have 15" rims. The e brake is by your own design. Will post pics when I can figure out the ne computer. Good guy to get the...
www.forabodiesonly.com www.forabodiesonly.com
 
Put a want ad up on FBBO or FCBO plenty around maybe close. Got mine from uncle tony when he used to sell here.
 
Mine work great just was a learning curve which master and where to adjust the proportional vale at.
 
Off to go about 80 more distributors to move into the container. Man you think you have it figured out spacing but HELL NO!
 
halifaxhops said:
Mike what size rim?
Click to expand...
215/70 r on the rear 7 1/2 wide on the rear, 4 " wide , 165/80 15" on the front

16836499504831671424681335404139.jpg


16836499906272088164940834743942.jpg
 

Trailer is not full yet, going with dog pen chain link down the middle

20230509_113037.jpg
 
As the summer moves all the shade, I am able to move the trailer to its best location for sun light.
 
So if you guys haven't seen me for a few days, it's because I basically been at the hospital since Monday at 5:00 a.m. The daughter began to have contractions early Monday morning at around 2:00 a.m. packed her and Mom up and took them to the hospital 15 minutes away from my house where her OBGYN doctor is. They decided that she was a little early, only 35 and a half weeks term. They were afraid that they were unable to take care of a preemie baby properly at that location. So they Chopper flew her to John's Hopkins in Baltimore. Mom and I followed in the car. I was here until 4:00 p.m. yesterday when I went home and left Chin here with the daughter. From what I understood she would not give birth for another day or two since she was not full term yet. She gave birth to a 5 lb 11 oz boy at 3:00 a.m. today Tuesday the 9th. She named him Ryan. I guess technically speaking this is grandchild number four for me. Lol. Daughter and baby will probably be here for 3 or 4 days before they let the baby go. We will see.
PXL_20230508_124945883.jpg


IMG_20230509_130337.jpg


IMG_20230509_084046.jpg
 
MOPARMITCH said:
So if you guys haven't seen me for a few days, it's because I basically been at the hospital since Monday at 5:00 a.m. The daughter began to have contractions early Monday morning at around 2:00 a.m. packed her and Mom up and took them to the hospital 15 minutes away from my house where her OBGYN doctor is. They decided that she was a little early, only 35 and a half weeks term. They were afraid that they were unable to take care of a preemie baby properly at that location. So they Chopper flew her to John's Hopkins in Baltimore. Mom and I followed in the car. I was here until 4:00 p.m. yesterday when I went home and left Chin here with the daughter. From what I understood she would not give birth for another day or two since she was not full term yet. She gave birth to a 5 lb 11 oz boy at 3:00 a.m. today Tuesday the 9th. She named him Ryan. I guess technically speaking this is grandchild number four for me. Lol. Daughter and baby will probably be here for 3 or 4 days before they let the baby go. We will see.
View attachment 1716088013

View attachment 1716088014

View attachment 1716088015
Click to expand...
Congrats!
 
MOPARMITCH said:
So if you guys haven't seen me for a few days, it's because I basically been at the hospital since Monday at 5:00 a.m. The daughter began to have contractions early Monday morning at around 2:00 a.m. packed her and Mom up and took them to the hospital 15 minutes away from my house where her OBGYN doctor is. They decided that she was a little early, only 35 and a half weeks term. They were afraid that they were unable to take care of a preemie baby properly at that location. So they Chopper flew her to John's Hopkins in Baltimore. Mom and I followed in the car. I was here until 4:00 p.m. yesterday when I went home and left Chin here with the daughter. From what I understood she would not give birth for another day or two since she was not full term yet. She gave birth to a 5 lb 11 oz boy at 3:00 a.m. today Tuesday the 9th. She named him Ryan. I guess technically speaking this is grandchild number four for me. Lol. Daughter and baby will probably be here for 3 or 4 days before they let the baby go. We will see.
View attachment 1716088013

View attachment 1716088014

View attachment 1716088015
Click to expand...
Congrats!

US born now too
 
MOPARMITCH said:
Ya, But I didn't know 2 years ago when I filed for her and her Moms Visa paperwork to come to America, that the daughter would be pregnant 7 months prior to getting here. Lol. All a part of God's plan I assume.
Click to expand...
For sure! I know you had been trying for years. Awesome it went they way it did
 
Was i here this morning? I think not. Got all ready and hit the door running. 5 trips for parts as i piece this car back together. Got it to bark, and it sounds great. Have to tweak a few things and i should be able to warm it up. Set timing and im done.
 
MOPARMITCH said:
So if you guys haven't seen me for a few days, it's because I basically been at the hospital since Monday at 5:00 a.m. The daughter began to have contractions early Monday morning at around 2:00 a.m. packed her and Mom up and took them to the hospital 15 minutes away from my house where her OBGYN doctor is. They decided that she was a little early, only 35 and a half weeks term. They were afraid that they were unable to take care of a preemie baby properly at that location. So they Chopper flew her to John's Hopkins in Baltimore. Mom and I followed in the car. I was here until 4:00 p.m. yesterday when I went home and left Chin here with the daughter. From what I understood she would not give birth for another day or two since she was not full term yet. She gave birth to a 5 lb 11 oz boy at 3:00 a.m. today Tuesday the 9th. She named him Ryan. I guess technically speaking this is grandchild number four for me. Lol. Daughter and baby will probably be here for 3 or 4 days before they let the baby go. We will see.
View attachment 1716088013

View attachment 1716088014

View attachment 1716088015
Click to expand...
Congrats !!
 
MOPARMITCH said:
So if you guys haven't seen me for a few days, it's because I basically been at the hospital since Monday at 5:00 a.m. The daughter began to have contractions early Monday morning at around 2:00 a.m. packed her and Mom up and took them to the hospital 15 minutes away from my house where her OBGYN doctor is. They decided that she was a little early, only 35 and a half weeks term. They were afraid that they were unable to take care of a preemie baby properly at that location. So they Chopper flew her to John's Hopkins in Baltimore. Mom and I followed in the car. I was here until 4:00 p.m. yesterday when I went home and left Chin here with the daughter. From what I understood she would not give birth for another day or two since she was not full term yet. She gave birth to a 5 lb 11 oz boy at 3:00 a.m. today Tuesday the 9th. She named him Ryan. I guess technically speaking this is grandchild number four for me. Lol. Daughter and baby will probably be here for 3 or 4 days before they let the baby go. We will see.
View attachment 1716088013

View attachment 1716088014

View attachment 1716088015
Click to expand...
That’s awesome! Congratulations Mitch!!
 
MOPARMITCH said:
So if you guys haven't seen me for a few days, it's because I basically been at the hospital since Monday at 5:00 a.m. The daughter began to have contractions early Monday morning at around 2:00 a.m. packed her and Mom up and took them to the hospital 15 minutes away from my house where her OBGYN doctor is. They decided that she was a little early, only 35 and a half weeks term. They were afraid that they were unable to take care of a preemie baby properly at that location. So they Chopper flew her to John's Hopkins in Baltimore. Mom and I followed in the car. I was here until 4:00 p.m. yesterday when I went home and left Chin here with the daughter. From what I understood she would not give birth for another day or two since she was not full term yet. She gave birth to a 5 lb 11 oz boy at 3:00 a.m. today Tuesday the 9th. She named him Ryan. I guess technically speaking this is grandchild number four for me. Lol. Daughter and baby will probably be here for 3 or 4 days before they let the baby go. We will see.
View attachment 1716088013

View attachment 1716088014

View attachment 1716088015
Click to expand...
Congratulations from your ol friend in Arkansas! Great new things happening in your life as usual. Hello to all , I hope your lady is doing well here in America.
Tooljunkie said:
Was i here this morning? I think not. Got all ready and hit the door running. 5 trips for parts as i piece this car back together. Got it to bark, and it sounds great. Have to tweak a few things and i should be able to warm it up. Set timing and im done.
Click to expand...
What car are we working on ? Who's?
 
MOPARMITCH said:
So if you guys haven't seen me for a few days, it's because I basically been at the hospital since Monday at 5:00 a.m. The daughter began to have contractions early Monday morning at around 2:00 a.m. packed her and Mom up and took them to the hospital 15 minutes away from my house where her OBGYN doctor is. They decided that she was a little early, only 35 and a half weeks term. They were afraid that they were unable to take care of a preemie baby properly at that location. So they Chopper flew her to John's Hopkins in Baltimore. Mom and I followed in the car. I was here until 4:00 p.m. yesterday when I went home and left Chin here with the daughter. From what I understood she would not give birth for another day or two since she was not full term yet. She gave birth to a 5 lb 11 oz boy at 3:00 a.m. today Tuesday the 9th. She named him Ryan. I guess technically speaking this is grandchild number four for me. Lol. Daughter and baby will probably be here for 3 or 4 days before they let the baby go. We will see.
View attachment 1716088013

View attachment 1716088014

View attachment 1716088015
Click to expand...
Congratulations Mitch.
 
You must log in or register to reply here.
-

Similar threads

E
ESPO Springs n Things
Replies
16
Views
549
RustyRatRod
RustyRatRod
ocdart
Bye, bye Parnelli...there's a spot on the front row waiting for you
Replies
12
Views
857
Chargervert
C
T
Anyone buy a group of about 8 A body parts cars out of southwest PA this past summer?
2
Replies
36
Views
923
mbaird
mbaird
CS1121
Body seam
Replies
13
Views
304
MOPARMITCH
MOPARMITCH
Johnny Mac
Stop in and see BluePrint Engines at Carlisle 2025! First time attending! Show Specials :)
Replies
8
Views
772
Johnny Mac
Johnny Mac
Back
Top Bottom