Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
Unconventional
Well-Known Member
I'll get some miles on me too today. My homie is retiring from Operating Engineer Local 12, jus like me. He has to take his paperwork to Pasadena for the pension peeps. That place is a real futha mucka to find 
. Sure it's right next to the Foothill Freeway but getting to it is a challenge After he retires he's moving to Ft Campbell Ky. So as long as we go that way we go to Phillippe's in downtown LA home of the French Dip Sammich He wants to check it out after he talked to a mutual friend I took there on a go kart parts run.
. Sure it's right next to the Foothill Freeway but getting to it is a challenge After he retires he's moving to Ft Campbell Ky. So as long as we go that way we go to Phillippe's in downtown LA home of the French Dip Sammich He wants to check it out after he talked to a mutual friend I took there on a go kart parts run.
Unconventional
Well-Known Member
Unconventional
Well-Known Member
This is for you guys! Happy Hump Day!
Unconventional
Well-Known Member
My Mommy warned me about girls like you! 
Mattax
Just the facts, ma'am
If I could be there, I would be. Whatever he does could be useful once its in the car and your trying to figure things out. If everything is the same, and its all perfect, great. More likely he'll have the WOT pretty close and the rest will have to be worked out. With data and knowing what was done you can be ready for increase in compression, or change in exhaust, or any number of things...
edit. My take on engine dyno's with some links
Engine Dyno Questions!
Hey all, My 1973 340 engine is about ready to go to the dyno. The problem is, the guy I am taking it to is local and says he is not sure how to set up the ignition due to there being the ECM and ballast resistor. I want to run it with the distributor that is going in the car. So, how can I do...
www.forabodiesonly.com
Last edited:
Unconventional
Well-Known Member
Hoppy .. Harbor Freight sells a Hot Rod 212cc they call a Ghost be just right for that bar stool 
Those days are over for me.Hoppy .. Harbor Freight sells a Hot Rod 212cc they call a Ghost be just right for that bar stool
Unconventional
Well-Known Member
It has a throttle, and it doesn't have to be WFO all the time
Scott I would definitely try to be there for the dyno. You will learn a ton of info on the Hemi.
Good Morning All! Fred, I hope you had a Happy Birthday!
My neighbors probably wish I learned that on my receiver lol!It has a throttle, and it doesn't have to be WFO all the time
Thanks I did Rich.
- Joined
- Mar 17, 2018
- Messages
- 17,152
- Reaction score
- 41,892
Travel safe guy. See ya on the flip side!
Morning gang cooled down quite a bit here looks like a high of 70* today.
On the plate today, possibly chop down a huge maple tree, looks to be in the path of one of our microwave shots, glad we own the property lol! Then tonight off to try to win 30k at casino radio contest. Have a Great Day All!
Good luck buddy win big!
Unconventional
Well-Known Member
Good far wood too
Unconventional
Well-Known Member
<~~~~~~ has Ronald McDonald's finest in the espresso machine today
Unconventional
Well-Known Member
Woah, did I sleep late. I almost didn't get the wife's lunch made. 
We have delicious coffee at church. I asked Barb what kind. "Folgers"
-
Similar threads
