Tuesday at 20:00... Feet Wet at approximately 20;19.... 
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
In about 30 min. Watching Mike and Molly until game time. Always funny.
My search attempts are coming up with garbage...
Tricks for getting the gear out?
Tricks for getting the gear out?
Screwdriver in the slot and unscrew it out of there. The gear will walk off the cam gear
It's off the cam.... still not coming loose....
How deep in the hole is it ? Can you use a set long pliers to get it ?
Any hook tool to get under the gear?
CBS Sports doesn't do a good job with cameras and production.
Don't see why not, if you must....
Probably not.
It went in and turned a million times. it will come out.
Too bad you don't have a small slide hammer with hook jaws
Yes. Varnished in I would imagine. Pull up and twist back and forth at the same time.
Might be hung up on the Oil Pump.....
Like Mike said. Those have close tolerances. Probably varnish built up
It was stuck. The bushing came out with it
Hai Quaaaaa..... Tieng Viet.....
After clean up, If the bushing goes in tight, it's all good.... 
-
Similar threads
