Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
My brother worked for a sign painter back in high school...
There was a sign painter's convention in Vegas that year and his boss went there... The day before the big day, some of the sign painters were bored and pin striped the toilets in the hotel lobby bathrooms... Management wasn't happy about that...
I don't know why, why not have fancy toilets???
No Karl no!
Or ask if the chicken breasts have been de-nippled.
Ask Ben he posted it earlier!
.perspective is everything.
"Will not part out"
www.facebook.com
4 door though...
1964 Plymouth valiant v8
1964 valiant V8 four door needs floor pans outer panels no rust inter fenders no rust car has title for parts or restore 1000 well not part out
www.facebook.com
4 door though...
Lots of parts.
I have the space to put it. Just not the time to haul it.
Closer I would grab it.
V8 car converted to a /6
Not every day that you see that
www.facebook.com
Not every day that you see that
1965 Plymouth barracuda
1965 Plymouth Barracuda · Coupe · Driven 84,000 miles 84,000 miles slant 6 225 , originally a 273 v8 car . Torqueflight 904 with floor console . Car drives and stops as it should. Driver quality but...
www.facebook.com
Yep. Nothing wrong with a Leaning Tower of Power but kind of heading in the wrong direction.V8 car converted to a /6
Not every day that you see that
1965 Plymouth barracuda
1965 Plymouth Barracuda · Coupe · Driven 84,000 miles 84,000 miles slant 6 225 , originally a 273 v8 car . Torqueflight 904 with floor console . Car drives and stops as it should. Driver quality but...
West of Elkins. No straight roads in that part of the state. About 3 hours +/- from me. Probs 4+ with truck and trailer.
I would love someone to take my 66 satellite off my hands. I really need it gone.....
Parking lots are made for peanuts, i drive a watermelon…
Even with the Nissan p'up It's tight. Especially the grocery stores where you can't get the side of the vehicle to load crap up. I guess they're built for SUB soccer mom's that park nose-in.
Never mind with the dually... Then your treckin' a bit to the building
Plowed snow. Now grinding out those hideous welds. Get a couple hours on the book to make up for last week. Die grinder with a small burr seems to be the most efficient.
Need to clean up the propane heater. It's struggling to light and then if I turn it to high it cuts out.
Seems like the feed nozzle is gunked up
Gott get some garage time in...
34* thus far... It ain't 40, but it also ain't 4
Seems like the feed nozzle is gunked up
Gott get some garage time in...
34* thus far... It ain't 40, but it also ain't 4
-
Similar threads
