Unconventional
Well-Known Member
I tried some new to me sausage the other day. Aidels Andouile , I think that spelled right . Perty good stuff.
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
For us in the breadbasket.
That's got a huffer on it.
It's taken me awhile to get moving this morning, this old body and brain gets on something it's hard to stop sometimes I guess, plus I cought myself enjoying it..
I wounder if I should wait a little over an hour and just say good afternoon
For your entertainment on this happy hump day.
My craziness, this is the cam shaft I had in my 360, going back the same if my spring pressure test shows the springs are still doing there job, possibly regrind and have the machines fellow check new hard hyd lifters are faced and ready for that cam.. men and ladies, memike is just a little wore out this morning, that's just something we all have to deal with when we have this gearhead sickness..
I wounder if I should wait a little over an hour and just say good afternoon
For your entertainment on this happy hump day.
My craziness, this is the cam shaft I had in my 360, going back the same if my spring pressure test shows the springs are still doing there job, possibly regrind and have the machines fellow check new hard hyd lifters are faced and ready for that cam.. men and ladies, memike is just a little wore out this morning, that's just something we all have to deal with when we have this gearhead sickness..
That sucks you had a cam go bad.It's taken me awhile to get moving this morning, this old body and brain gets on something it's hard to stop sometimes I guess, plus I cought myself enjoying it..
I wounder if I should wait a little over an hour and just say good afternoon
For your entertainment on this happy hump day.
My craziness, this is the cam shaft I had in my 360, going back the same if my spring pressure test shows the springs are still doing there job, possibly regrind and have the machines fellow check new hard hyd lifters are faced and ready for that cam.. men and ladies, memike is just a little wore out this morning, that's just something we all have to deal with when we have this gearhead sickness..
View attachment 1716377353
View attachment 1716377354
View attachment 1716377355
View attachment 1716377358
View attachment 1716377359
View attachment 1716377360
View attachment 1716377361
View attachment 1716377362
View attachment 1716377363
Down to 251.6!! My lowest so far… started at 291.2….
Great news. I don't think I would want to go through what you did to get there though.
I’ve not eaten food in three days… just smoothies and tea. Kind of sucks
Still a lot of wire to deal with. Working on it-slowly. That silly module powers everything. Sensors, injectors. Have to make sure i dont miss anything.
New Doobie Brothers album out.
Well, it's not like I was surprised, my son and I raced it hard, red lined him out at 5.500 , but I have seen 6.000 in it plenty of times even on the street in my old gray truck. Then stored for over 18 years, a first fire up I pre lubed it but I believe a lifter stuck and put a bend in one push rod or it happened back in our day driving/racing it, if I recall, Creed took it and a couple friends to race it and stuck two 8 inch wide slicks on it and ran a 7.40 1/8, fastest pass, he has the sheet on it, but the chassis (as you may remember) flexed and drove a shock plate almost out, and the steering box bolts (two of them) was ripped halfway threw the frame.. 3.55 sure grip.. so yes, the cam held up just took the crown off some lopes, will find out how much very soon
It sounds like a great tune. I love the Doobies.Thank you Mike !!Shared with Creed
Congratulations, hang in there, looking forward to seeing where you are in July
Found it, only one I have, and yes, I built that hood from a 72 roadrunner hood that had a miss hap..
That is the same line the announcing tower uses at Bonneville and El Mirage when someone experiences "unexpected self disassembly" of components, usually engine related. "Looks like we are going on course hold, having a yard sale"...
Yup....
abdywgn
dismantler
Happy Y-block day!
250 was my goal but I’m thinking now 230Congratulations, hang in there, looking forward to seeing where you are in July
I like all animals. It's just lately Im with Rob. More partial to Pussys.
- Joined
- Mar 17, 2018
- Messages
- 17,133
- Reaction score
- 41,835
Cat woman for the win!
Pussy Galore
-
Similar threads
