I dropped in an older map... it's up on the show field area where the trucks sit I think ???
I was gonna say that Gate 5 was next to Gate 6 and across from Gate 4...
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
I dropped in an older map... it's up on the show field area where the trucks sit I think ???
I was gonna say that Gate 5 was next to Gate 6 and across from Gate 4...
What could go wrong?
zkx14
Duster De-ruster
Yeh it's back off the hill somewhere. Mitch and Hoppy are in the back corner near 7.I dropped in an older map... it's up on the show field area where the trucks sit I think ???
I was gonna say that Gate 5 was next to Gate 6 and across from Gate 4...
What fun is in that?
Unconventional
Well-Known Member
I don't know what brought it to mind, but in the recent past the similarities of the Spring weather here and in the old desert homeland got my attention. Spring in the desert is wind season also with the additional free sand blasting . That I have known since the first 3 or 4 years I have been here near the beach. Something made me look at a California map. Within a few 1/100s of a degree, we are at the same latitude as Barstow, the old homeland 
. So the wind hits the beach here, wanders through a couple mountain passes to the desert, picks up a large amount of fine aggregates and proceeds to remove paint, chrome, and glass across the Mojave . In June, we get June Gloom here, daily fog. Barstow gets 100degrees daily. 
me
The FABO Coffee Corner back in there
zkx14
Duster De-ruster
Except the main beverage in that corner ain't coffee
OK computer whizz's I need a new or a kit to rebuild my Master cylinder. This one says compatible with 1107-C mine is an FF-1107. They look identical. Where or what do I google to see if they are the same? I can't find it and afraid to spend $138.00 and be wrong
It does work but I wouldn’t do it
Are you sure FF and not FE? Also looks like casting number may be 1107 or FE1107........................
MASTER CYLINDER WAGNER FE1107-722
www.powerbrake-drivetrain.com
I just checked again....FF
- Joined
- Mar 17, 2018
- Messages
- 17,153
- Reaction score
- 41,896
I had a blast hanging out back in there! Craig was on a mission so we were wam bam and thank you ma’am but certainly got some cold brew. Just a great trip thanks @ZMan67S
zkx14
Duster De-ruster
I was going to ask same. Only thing I get for FF1107 is a fuel filter.
or parts for Arctic Cat????????
So what about the one I showed that says 1107-c Do you think it will work? Will the FE work?
zkx14
Duster De-ruster
No clue. Not uncommon for same castings to have different bore on other master cyls
That one is 2x the price of the one on Ebay
zkx14
Duster De-ruster
what is it for?
Not sure? The one I posted is definitely more money but says on there casting #1107 but no "C"?
1939 International d3 pickup truck
Old International Truck Brake Parts • Old International Truck Parts
Find your old International brakes, cylinders, kits, shoes, drums and anything brake related.
oldinternationaltrucks.com
OK I just talked to the guy on the site you shared. He says they are all the same just a different mold. Says even the 1107-C will be the same. Very knowlegable guy I would like to buy from him but boy the price difference makes it hard
I have been all over that site. I was going to call them but wanted to find something cheaper
Ask him if there is any room on the part $. Good customer service and knowledgeable, buying from him he may cut you a break...............
-
Similar threads
