Question? What is the length between the mounting holes on a 68 to 72 A body sway bar? There must be a general measurement. Factory location. Not aftermarket. Any info or past posting would help. Thanks.
Do you mean the holes in the K-frame for the brackets? Those holes are already present on every K-frame I've seen. Or do you mean the distance from end to end for the endlinks?
Endlink to Endlink distance is what I need. If there were several mopar sway bars in a pile. How would you know the difference between let's say a B body or C Body or A body? There must be a measurement?
Hmm, that old thread, without photos, is more confusing than helpful. Dragging in the 73-up swaybar measurements is just confusing the issue -- there is no resemblance to the parts or how they attach. I think I've settled the question -- I provided an end-to-end measurement for the 67-72 factory sway bar. Any aftermarket bars would have to be within some fraction of this dimension, or they won't work.
I converted mine (67) to a later K/ later anti sway, so anything I have now is incorrect. Too bad about that thread, OldManMopar had some great photos of the differences
Now you guys know? why I ***** about the "new improved" software?