Trick Flow Specialties New Product Announcement - PRI 2025

[Car Nut]

 

[Car Nut]

 

[Car Nut]

 

[408 swinger]

Very awesome! Thanks for sharing!

 

[Dartnut]

Thanks for this.
Any news about the pricing?

 

[Car Nut]

Thanks for this.
Any news about the pricing?

Nothing yet, it was being shared from Trick Flow less than 40 minutes when I posted it, hopefully not too high.

 

[Car Nut]

 

[lead69]

Considering they sell out the small block heads all the time they should get off their *** and do a new/bigger version of that!.

 

[Car Nut]

Thanks for this.
Any news about the pricing?

This was posted later.

 

[Car Nut]

Considering they sell out the small block heads all the time they should get off their *** and do a new/bigger version of that!.

I agree, that would be nice.

 

[jbc426]

Dang, they flow 360 CFM at .600 lift. That's significantly more than my ported Indy EZ's at 345 CFM.

 

[Car Nut]

Dang, they flow 360 CFM at .600 lift. That's significantly more than my ported Indy EZ's at 345 CFM.

Too bad Engine Masters went off the air, I would like to see a comparison between those two.

 

[Car Nut]

Trick Flow said about $980 for their new roller rockers.

 

[fishmens67]

Dang, they flow 360 CFM at .600 lift

about the same as the Chapman 285cc Stage 6

 

[Car Nut]

about the same as the Chapman 285cc Stage 6

I need to look those up.