Hey guys I'm going to be putting together a 360 for my truck, it will be used primarily for towing. Just looking for so opinions on a decent motor that is reliable with a fair amount of power. It will consist of a 360 with some 107's and 587 heads I will be decking the block to zero and should end up with about 9.8 compression. I will be running a air gap and a 670 Holley on it. I'm just kinda looking for ideas on a good can for low end torque also wondering if I should do any head work (very light porting) or just keep them as is. It's going in a 1970 dodge 4x4 with a 727. Tall gears and tires.