turbo hemi 65 dart...

[jw97neon]

do you think I can make it fit? I am thinking no inner fenders...

 

[subcom]

Hell ya it'll fit! Twins? Nice! We know 3rd gen hemis can fit in an early A. Lookup Tincups build. Downpipes will be a challenge, but removing inner fenders will open up a lot of real estate to work with. Go for it...and post lots of pics!

 

[MuuMuu101]

With a sawzall, sheet metal, a welder, and alcohol anything is possible.

 

[Kmrumedy]

This guy put an elephant in a 62 A body.



You can read about it here.
1962 Valiant Hemi-powered

There is also a member named 65Valiant on here that put a Gen 1 in a 65 Valiant.



Very cool motor. Would like to see your project.

 

[prrc]

I would say its possible. Just depends on your fabrication skills. There will be a lot of challenges along the way.

 

[subcom]

...and keep reminding yourself how easy it will be to change the plugs.

 

[pishta]

No inners...you got 29 inches between the shock braces and they come back off the trans face 8 inches forward and are 4 inches wide. So in a nutshell, if you remove the inners and run a standard shock location, you have a box 29 inches wide and 4 inches deep 8 inches forward of the trans face. Everything else is wide open minus the K frame down under. If you remove the shock brace, its a whole new arena, mount the shocks to the J bars you have to use to support the front end.