its right there in the first post "go kart"
but i admit, i hid it for comical effect
Go for it! Just remember to use left hand thread studs on the left side wheels.hey guys, i want to run some wider wheels, and according to my calculations, the new wheels have 3 inches more of backspacing then my old ones
so, to keep the tires out of the frame, i figured i could install some longer studs and cut some tube to use as spacers
as long as all my tubes are close to the same length, and i bump my wheel studs up to 5/16th i should be good right?
almost forgot to mention, im talking about a 5.5 hp go kart, of course
hey guys, i want to run some wider wheels, and according to my calculations, the new wheels have 3 inches more of backspacing then my old ones
so, to keep the tires out of the frame, i figured i could install some longer studs and cut some tube to use as spacers
as long as all my tubes are close to the same length, and i bump my wheel studs up to 5/16th i should be good right?
Wheel Spacers in general are a terrible idea! Buy the correct wheels.
almost forgot to mention, im talking about a 5.5 hp go kart, of course