SRT_DSTRHOLC
"There is never enough horsepower...."
When I replaced my PV with a 4.5 I was able to get the needle to stay inbetween 8-9 but not dead on one. What would casue this? I saw some where that maybe bad lifters or bad lobe?
vacuum reading not steady
- Thread starter SRT_DSTRHOLC
- Start date
-
SRT_DSTRHOLC
"There is never enough horsepower...."
anyone? I also have a high stall converter
SRT_DSTRHOLC
"There is never enough horsepower...."
thank u
-
Similar threads
