Waiting For Response to Question RE: Barracuda Paint Gasket Set ('65)

[dibbons]

I should be hearing back from Detroit Muscle Technologies anytime now. I see a notice on their website no more international shipping. I guess I have been lucky, haven't lost anything yet (problems with delays and damage, yes).

Hello, Regarding the ABA6565PK01 1965 Barracuda Paint Gasket Set I have a problem identifying three items in the package, can you please help? The material for all three items seems to be about the same, it's a white-colored foam. Item 1 is two wound up rolls of white foam ribbon, Item 2 is what looks like four white foam large "washers" which are round with a tiny hole in the center, Item number 3 is shaped like a donut round with a large hole in the center. Thank you.

 

[Plymouth 65]

Item 3 I believe goes between the filler neck and quarter panel. From you're previous post, the 2 black plastic spacers go on the rear quarters in the rear where the rear bumper wraps around the quarters. 65'

 

[Greasyfingers]

The rolls of foam I believe go below the drip rail moldings. Mine are just black.

 

[dibbons]

Is the above photo taken from outside the vehicle?

 

[Greasyfingers]

Yes. That foam appears to go between the roof and the stainless trim that the upper weather strip mounts to.
Aaron