[WANTED] wanted, 66 Barracuda Trim
- Thread starter johnniesrotten
- Start date
-
- Status
chryslerfat
Well-Known Member
Member cosgig may have what you need.
Member cosgig just sold a set to another member! I do have another set, but must check their condition before putting them out for a members car! Ill get them down and check their condition and picture them here for consideration!!
MidTexCuda
Ancient Member
are you looking for the drip rail above the windows on both the driver and passenger side?
johnniesrotten
Active Member
no, I need the trim that runs down the top of the quarters from the door to the tail light
johnniesrotten
Active Member
any luck Cosgig, this is like looking for a needle in a hay stack :burnout:
winstoninwisc
Taint easy livin free,season ticket ona 1wayride
no/////= easy find just the spears I just sold a set but can get you some 65s did you try340sedan ,keith has a lot of 66 parts usually also shoot me a pm for my phone # I got cha coverd
johnniesrotten
Active Member
i tried to search for this guy but could not find him
66340SEDAN
FABO Member #3649
Sorry, I don't have any of that trim. It's a tough one to find in good shape cause they were made of aluminum and only one year. 64-65 Were made of stainless which held up better, but unfortunately is narrower and doesn't line up with the tail lights when used on a 66.
I have seen some on eBay before, but keep in mind any you find will probably need to be restored. Might be easier to have yours restored if you already have a pair, I have seen some nasty trim with dents restored to show condition before , aluminum is easy to work with too so yours might be a good candidate.
My dad has a 66 Cuda and might have an extra pair, I'll check with him.
70DartMike
Too many projects
I may have a pair from a '66. Give me a bit to check it out, I won't be home from work for 5 days.
- Status
-
