I need pictures of 63 - 66 A body K frame cut for an RB oil pump, and pictures and or advice on how to deal with the tunnel pinch weld to drop an RB into my 64 Dart. Thank you
Last edited:
WANTED: Pictures of 63 - 66 A body K frame cut for an RB oil pump
- Thread starter wawarnick
- Start date
-
mopowers
Well-Known Member
I didn't have to cut the K-member for the 400 oil pump on my 66 Dart. I did have to raise the transmission tunnel about an inch. I do have the engine a tad higher than stock though and I needed the room for a transmission blanket.
Thank you for the information.
abodyjoe
Well-Known Member
when i did my 64 i didnt cut the k-frame for clearance. raised the engine just a hair and it cleared perfectly
-
