what trans cooler lines?

[swing69]

for a modern 904 in an early A; what tranny cooling lines did you use.

thanks

 

[FJ5]

I would like to know also.

 

[70aarcuda]

#6 steel braided..

 

[whitepunkonnitro]

Fittings are all in the same place on early and late 904. I've got them if you need a set. $40 a set.

 

[swing69]

I thought the early A's had little 45 deg. fitting coming from the trans, and later had straight......

 

[subcom]

I bent all of mine using the AGS polyarmour steel tubing you can buy at NAPA.
It's fairly easy to work with.

 

[whitepunkonnitro]

I thought the early A's had little 45 deg. fitting coming from the trans, and later had straight......

The fittings may be different, but the holes are in the same place.

 

[BillGrissom]

Can't you change any brass fittings installed in the tranny? The shift lever vs cable might have required a few different bends in the tubes. The engine brackets changed in later years, which might have changed the tubes. We don't even know what engine you have. Browsing photos in Google Images is your best shot.

 

[swing69]

360/904. 5th ave. kickdown. shifter TBD (either mopar console or aftermarket cable).