Search results for query: *

Good Day, i am looking for someone in the Tacoma-Seattle (Graham) Washington area that can set eyes on (inspect) a MOPAR for me and relay the gathered information. i am researching to see what works out better and this is one option. PM me for more information.

I am looking at a MOPAR (B BODY) guesses welcomed, pretty excited to get her over here as soon as we can figure out... My question being has anyone ever bought a car across multiple states sight unseen and what is the best way to handle money transfer and avoid potential scam. from research i...

hey guys its been a while - 1968 plymouth barracuda notchback 440 RB (1973 charger) all stock 727 trans. looking for someone to build it - i'll pull it out with trans and just need it build - been trying to find a shop aroun dmy location but no luck really. i can do it myslelf but do not have...

Hey guys, looking to put some money into the shark- 1968 Plymouth barracuda notch with a stock 1973 Dodge Charger 440 RB. What is the best cam to install on a completely stock stock 440 RB. Looking for recommendations and looking for that ‘stroker rumble’ not looking to put so much into it...

Hello, I am in process of looking for a new brake booster. 1968 Plymouth barracuda Notchback with a 440 from a 73 charger. i am not sure if the brake booster is original But it’s pretty huge and old. Looking to clean the engine bay a bit with something more sleek cleaner and smaller. Do...

looking for a set of wheel well trim - so cal pick up preferred to save on shipping but let me know what you guys might have. thanks .

Hello Everybody long time, 1968 Plymouth barracuda Notchaback i am looking for a shop to do my head liner in orange county (Socal) area. would appreciate any help.

1968 Barracuda notch (73) 440 charger motor with 727 trans. all stock - recently replaced the distributor with an ebay distributor the original one had busted threads to both vacuum bolts. and faulty internals giving me bad ignition timing 'tune' anyways i bolted this thing on and it turns...

1968 plymouth Barracuda 318 torqueflite - ignition on dash #1 I am trying to source the wiring connector pigtail connector that plugs into the ignition switch if i cannot source it for a reasonable price i could re do it with shrink tube and all. but looking to see whats out there. #2...

1968 barracuda notch 1973 440 motor at random times my car stalls from either not being warm or stalls because it use to have bad timing or carb tune. anyways... So not always but at random times rarely - the car wont turn over. (wait it out and then it turns over and on) i recently...

RECENTLY installed an intake riser 1968 barracuda notch - 1973 charger 440 STOCK cable is okay and long enough but issue is with the tie down cable bracket which allows only for certain amount of slack & need a higher bracket for the throttle to be fully seated and closed ... anyone have any...

1968 Barracuda Notch. 440 RB 727 trans. 83/4 rear have a few issues here and i wanted to know exactly what i was getting myself into. A few weeks ago a noticed while trying to start her up from a cold winter a noise she was making that i haven't heard before. further inspection of this...

any one know what the white plastic washer holders for the steering column are called and where i could get them? the hold the column part that cradles the actual column. there are two of them possibly three. is square looking with two notches

STEERING U-JOINT 1968 barracuda notch 1973 RB 440 727 trans - 8 3/4 rear end power steering power brakes (disc front drums rear) steering box ???? unable to get numbers off of it (tight squeeze) stock everything - Okay so the last time i attempted this i tried about two or three different...

HELLO, guys i think i have asked before but couldn't find any evidence that i had. I am looking to replace my brake booster and master cylinder on my 1968 plymouth barracuda (not original or original owner.) it has power steering - front disks rear drums - with a dodge 440- i am browsing around...

okay so some time ago i switch my 1968 Barracuda Notch over from stock to SS leaf springs and drag shocks. my question to you guys is - can i deARCH the leafs and get a 1-2 inch drop even though i have longer drag shocks or would i be wasting my time and not get a lower heigh because of longer...

1968 PLYMOUTH Barracuda Notchback 440 RB front 73 a-body BBP discs rear 8 3/4 BBP drums and power steering. limited space we are working with here. looking for a replacement small as possible. replacing booster and reservoir. with my car having parts from many mopars im in a bind. if...

1968 barracuda 440 8 3/4 rear sure grip 727 front 73 A-body big bolt pattern disc brakes. so after years and years of great enjoyment my Shark took a dump. (if we are being honest.... Another dump) feels good once we get her fixed and going though. haha Driving down the 57 freeway felt what i...

1968 barracuda 440 1973 A-body front discs big bolt pattern last night car got the shakes and limped my car home my wheel ate up my outer wheel bearing got so hot it fused to the wheel spindle. Any one in so cal that has an extra wheel spindle would really be saving my life. Pm me with price.

1968 Plymouth Barracuda - 440 727 8 3/4 [Friday] So i recently purchased an aluminum water pump housing from summit it came with the bolts and gaskets, figured id take on the "task" this past weekend of installing it. Moved on ahead, first step drain the coolant followed by removing the...

1968 Barracuda - my question here is is it possible to fit ss springs with stock non-ss shocks. ive seen people put on new regulars spring and shocks and get same lift and ss springs and shocks. i currently have drag shocks with my ss springs and wanted to try and put normal shocks maybe get...

Not sure if i mentioned to all you guys that live in So CAL. I work for a Lubricants company i can get most oils, coolants and race fuel and propane at cost. if anyone ever needs. just shoot a PM

440 big block - water pump housing torque specs and water neck also water pump please. if anyone knows these off the top of their head. thanks.

i have a 1968 plymouth barracuda with a 8 3/4 rear end big bolt pattern. my question is... What drum brake pads would i need to buy? are there different ones? :coffee2::burnout:

i have a 1968 barracuda originally a 318 with a 440 from a 1973 dodge charger, current idler arm hits slightly on the oil pan. should i be using a 1973 big block dodge charger idler arm? or stick with 1968 barracuda ? also are the big block and small block the same?

I have been noticing top of my passenger wheel is positive (top of wheel sticking outward) and it gets worse over time also now recently when driving steering is dangerously shifty... If that makes sense.... Pulls right or left on occasions. I set the camber bolts this way.... Driver side...

Driveline shop in Placentia California info: Address: 471 Industrial Way, Placentia, CA 92870 Phone:(714) 993-6494 Just wanted to get them out there for anyone in SOCal.WITH DRIVE SHAFT needs ***** (five star extremely satisfied) These guys did a great job building me a brand new drive...

1968 plymouth barracuda 440 8 3/4 rear (SUREGRIP) i recently started to drive my Barracuda (daily driver) work and back home about 20 miles round trip daily and started to notice the vibration. recently did the SS suspension on it and thinking the angle might be off but took a quick look...

i have a 1968 barracuda 440 8 3/4 rear 727 trans. when going from drive to reverse and the other way around its a bit ' jerky ' ' noisy ' in my opinion not much but its there a bit bothersome. :blob: would this be something with the transmission or the rear end or drive shaft?