Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
Hobart 140 will do everything you need for car work... And 120v lets you use it anywhere.
Unconventional
Well-Known Member
It's Studebaker Saturday!
Gooood morning and afternoon!
Gooood morning and afternoon!
What do you guys think of this/
https://www.amazon.com/dp/B072S5J17X/?tag=fabo03-20
https://www.amazon.com/dp/B072S5J17X/?tag=fabo03-20
Unconventional
Well-Known Member
Me either......Reviews are mostly good.....Looks like a neat little machine
Not familiar with Weldpro though.
Unconventional
Well-Known Member
If it will burn 1/8" 7018 that's about all most small shops would ever need.
I already have a weldpak 155 that can be set up for MIG. I wanted an all in one setup....
I already have a weldpak 155 that can be set up for MIG. I wanted an all in one setup....
And I have always liked the way an inverter welder welds....
Yeh, you are
It sounds good, but my experience is any tool that tries to do too many things doesn’t do anything as well as one made for the individual task.
I can really weld nice with a stick welder.....Not as nice with wire feed....But I am wanting to get better....AND tough to weld sheet metal with a stick welder....
Madness!!
And going for another trip, s-10 and a box off an old studebaker maybe? threw them in. So now i have the proper chassis to build what i wanted. Or not.
-
