Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
What a jack off!
Let the other inmates catch him doing that in jail and see what happens....
Not as much progress in the basement today as I had hoped. My ankle is hurting i bit, so trips up and down the steps are no fun... I did organize a few things in my workshop area and swept the floor..
Filled all the old screw holes from the old storm door. Will sand and paint before I put the new one on - hopefully sometime this week. Also replaced the old ABC fire extinguisher in the kitchen with one of the white ones that is supposed to be better suited for that room.
Filled all the old screw holes from the old storm door. Will sand and paint before I put the new one on - hopefully sometime this week. Also replaced the old ABC fire extinguisher in the kitchen with one of the white ones that is supposed to be better suited for that room.
Good evening.
Cleaned up some in the garage and fiddled with the new organ.
today.
Made space to bring the mower in from outside. Tightened up some connections on the plow attachment so It won't needed for winter.
Soaking my feet now in a bucket of hot Epson salt water.
Getting old sucks at times.
Cleaned up some in the garage and fiddled with the new organ.
today.
Made space to bring the mower in from outside. Tightened up some connections on the plow attachment so It won't needed for winter.
Soaking my feet now in a bucket of hot Epson salt water.
Getting old sucks at times.
383B
Dead center on both sides. Right between 3,4,5&6 cylinder holes
Good evening.
Cleaned up some in the garage and fiddled with the new organ.
today.
Made space to bring the mower in from outside. Tightened up some connections on the plow attachment so It won't needed for winter.
Soaking my feet now in a bucket of hot Epson salt water.
Getting old sucks at times.
Yeah, today was an indoor tidy-up day. Little dry wall work that's been due and getting some stuff organized in the garage
Epsom Salts works wonders though. If nothing else the magnesium helps me sleep.
Ugh...
Fixable. @halifaxhops
In the water jackets.
Lock n stitch. There is a kit. I. Think.
I forget what he used it on, but here is what Hoppy had . Somehow it actually draws the crack together.
Cast Iron Crack repair - YouTube
lock N stichI believe that's what HOPPY used.
I generally drill a hole at both ends and weld with NI pure nickel rod. What hoppy used required no welding.
Last edited:
Which was was more fun?
Golf, or drinking?
Happens all the time
No way! I’ll hemi swap mine first lol
Nope. There’s a company in Texas that makes a harness that is plug and play right into my factory Jeep harness for 850 bucks. Including the ECMBut a Late model Hemi swap takes a lot of complicated wiring!
And soon electrical wiring won’t be any issue. I’m working daily with an electrical engineer and go to a training course next week. Should help a TONBut a Late model Hemi swap takes a lot of complicated wiring!
AC is different than DC. LOL
A lot.....
-
