[WANTED] A833 /904 7290 Slip Yoke

["Dart67"]

Like the title says, I am in need of a A833 /904 7290 (Large) U Joint Slip Yoke.

 

[GTX JOHN]

I thought the 904 yoke was much smaller than the 4 speed yoke?
Of Course, I am Old and memory is not great!

 

[RustyRatRod]

I thought the 904 yoke was much smaller than the 4 speed yoke?
Of Course, I am Old and memory is not great!

So did I!

 

[lemondana]

The 904 is small-7260 and the 66 A Body A833 uses the small 904 slip yoke. All other A833's and the 727's use a larger slip yoke, can be 7260 or 7290. Mopar Performance used to offer a 7290 slip yoke for the 904, and I think they were used on some Dodge Dakota's

 

["Dart67"]

I thought the 904 yoke was much smaller than the 4 speed yoke?
Of Course, I am Old and memory is not great!

So did I!

I need this for my 1967 26 spline 833 4 speed.

The 904/833 26 spline 7290 yokes are around. Just hard to find.

I stole this 4 speed explanation from another post here.

slip yoke for a833

so i bought my rebuilt 4 speed with a case number C97372 for my 69 dart. and i ordered the wrong slip yoke because i didn't check the spline count. i thought it was a 30 spline from the description saying it fits a833. so i find out its 26 spline. is this right for my transmission. i wanted a...

www.forabodiesonly.com

 

[lemondana]

I have the part number out in the garage. There might be one floating around somewhere. I might have an extra one. I'll look.

 

["Dart67"]

I have the part number out in the garage. There might be one floating around somewhere. I might have an extra one. I'll look.

Thank You..

 

[AJ/FormS]

I learned something new, right here.

 

[E7polyhachett]

I believe you can purchase one from A & A transmissions brand new. At least
saw them last time I was on their website. Not sure the cost.

 

[PROSTOCKTOM]

Here's the yoke I would buy. Buy it once and never worry about it. Billet 4340 for $105

Chrysler Mopar 904 26 spline 1350 Transmission Yoke 1350 Slip Yoke cr-mo | eBay

Tom

 

[GTX JOHN]

---

Is not the 904 yoke diameter smaller than 1967 up 4 spd yoke?

 

[lemondana]

I thought the 67 A body was the large one also, but since they used the small spline A833 behind the 1966 273, they possibly could have used them behind the 67 273 also. I'm not sure.

---

Is not the 904 yoke diameter smaller than 1967 up 4 spd yoke?

 

[446acuda]

Like the title says, I am in need of a A833 /904 7290 (Large) U Joint Slip Yoke.

I sold a 7290 904 to an overseas member a while ago and might have one more. I will look around today. Here is a picture for reference, the 7290 below the 7260 has the casting number right on the yoke and is big and very visible.

 

["Dart67"]

I sold a 7290 904 to an overseas member a while ago and might have one more. I will look around today. Here is a picture for reference, the 7290 below the 7260 has the casting number right on the yoke and is big and very visible.

View attachment 1715995877

View attachment 1715995878

Thank You... Could you please let me know one way or another...

 

[446acuda]

Thank You... Could you please let me know one way or another...

Yes, I will PM you

 

[cudamark]

I thought the 67 A body was the large one also, but since they used the small spline A833 behind the 1966 273, they possibly could have used them behind the 67 273 also. I'm not sure.

Yes, '66 and '67 still used the 25/26 spline slip yoke unless you had a 383 engine. Those came with the 29/30 spline yoke.