Recent content by IndianaDodge

Any offers?

Early 70s A-body floor shift console. includes linkage, sheet metal shifter seat, one sheet metal bracket. I believe all the linkage is here. Will need some bushings, clips, & hardware. This is not a perfect piece. driver quality. some pitting in chrome bezels and shifter. glove box button...

Thought I would add to this old post... I am installing a 360 into my 65 Dart. I went to use the passenger side mount from the 1965 273 and found the same problem where the passenger side ears on the 273 are two holes in the back and one in the front. where the 360 is two in the front and one...

Thank you!

Any updated pics?

Pm sent

$1500 1973 340 std bore block & crank cleaned and ready for machine work. Block will need a .030 bore and crank will need .010 on the mains and rods. It comes with orig rod & main caps w/bolts, orig stock pistons & pins (Two have rings stuck), and orig rods. Also included but not cleaned are...

Thanks for the offer but think I'm going to stay with a Hydraulic cam.

I was thinking the same on the gears.. Once I get the 340 in it, some 3.55 or 3.73 was next on the list.

Any suggestions on a cam for my 340? I'm looking at ordering everything to be a match set. Such as Cam, Lifters, Push Rods, Springs, etc.. Many to choose from, thought I would get some input. I'm working with the following. stock 340, J Heads Edlebrock Air Gap intake & Edlebrock 600...

I bought this set. /6 to 360 and posted a few years ago. Summit had them for $60 made by TransDapt http://www.forabodiesonly.com/mopar/showthread.php?t=156115

Sure, I would buy it. I paid 300 for one, carb to pan last fall

I bought a set 3 years ago for my 360, so far they have worked fine.

I thought I would bump this post. The Tran-Dapt 340/360 to /6 k Frame mounts I purchased from Summit in 2011 and are still holding up well. $60 from Summit http://www.summitracing.com/parts/trd-4675/overview/

Don't forget to look for that 360 in an old Dodge van, camper, or trucks. You would need to change the oil pan and oil pickup tube. In 2011 I found an old camper with a 360 and built a budget engine. It had roughly 50k miles. I cleaned, painted, and added a cam, alum intake, holly carb. I...