Recent content by Mister Mopar

Welcome aboard ! Cheers Trevor Halifax, NS

All I see on eBay are the solid rubber weatherstripping for the A body trunks. My '73 has the hollow weatherstripping, but needs to be replaced. Where can I get the hollow style trunk weatherstripping ? Thanks in advance Trevor

+X on the prep work. I think I used brake cleaner or acetone or something prior to using a 'vinyl dye spray' and it's held up pretty well for ~ 10 years. Every year I do 1-2 mins of touch ups and I am golden. Cheers and good luck !

You looking for new or used ? I used to have a couple used ones in Oxford NS.... Trevor

19 ?? You'll be an expert in no time ! - Welcome aboard ! Cheers

I've used an old Shop vac hose. I bought a new one at Home Depot for $20 and the old one worked fine. I think it was 2 1/2" diameter, so it fit insdie the dash vents and outside the small heater box outlet. I did have to cut and seal for the larger outlet. Cheers Trevor

Happy Birthday Jamie. Get any cool stuff for the Duster :) Cheers Trevor

Well - here are a few pictures taken today after a local show n shine. I have the stripes on and interior mostly finished ! and sure feels nice to have something sorta finished :) Keep it up everybody ! Cheers Trevor

I will be there. I am planning to take the Duster and the Shelby Lancer. The Duster still has a lot of minor finishing to do, but meh, at least I "ll get to drive it some more :) Cheers Trevor

Realest: Unless you are going for originality, do a 360. I've built 3-4 360s from almost junkyard parts: Use mid-late truck motors or cop mills as a starters and do some research to see what years had shot peened cranks and rods. A little bit of head work, careful cam selection, 4 bbl...

Hey gang, I have my Duster on the road now and I am having carb issues. It goes like this: 360 4spd car 3:23 gears I am using a new-to me motor - 360 bored 060 thousandths. Old Aluminum Weiand DP intake that is set for square bore carb. I had a sweet running thermoquad on my previous...

Hey gang, I am putting the interior back in my 73 Duster and I see I am missing the nut that holds the passenger side rear seat belt retractor assemblt in place. It appears to be a fine thread, but I've tried every size nut I can find / think of and they are either too big or too small...

mtn jake - it took about a year once I got serious. I changed the motor, replaced clutch, brakes, sway bar , power steering, springs, etc etc. You just have to decide you are going to finish it and devote some time. I have 2 little ones at home, so it can be hard to find the time ! Coyote...

Welcome aboard Woody - nice 'cuda - I love the colour ;)

Hey guys, I was hoping to wait until I had the carpet and stripes on - but here it is anyway: http://www.motorsport.wlrgroupco.com/ click the link for 73 duster and you'll see the pictures. I'm doing carpet his week and hopefully will be on the road by the end of my vacation (06 Aug)...