Recent content by nasty68

I want to repaint the upper and lower part of the doors, mine are faded and the paint is wearing away. The interior is black. Were the doors painted a gloss or was it more of a satin color?

Yep, the 84cc version out of the box. Short block has been together since the early 90's.

Only had it to the track once so far and i was shifting at 6,200 and it felt like it was still pulling. I am running the stock springs that came with the Edelbrocks. The specs are close to what Lunati recommends. They told me i would be fine using those springs.

I have that cam in my 383, recommended by Lunati. .030 over, stock crank, rods, old trw flat tops, eddy heads, street dominator intake, 4.10's and at the time an old fairbanks 2,400 stall. Dart went 12.80's with a bad bog in the carb.

S&W Racecars. They make shock brackets that are cut to fit a back braced rear end.

I run mine on the street. Heim joints and i run a panhard bar as a locator.

Cool, i will have to pick one up. I don't want to take any chances on sucking the pan dry. Thanks.

So if i wanted to take off my stock pan and run the 46rh pan, would i just have to get a filter extension to use it?

Trust me, its a 7.3L. It ain't gonna run that fast. They are known for being reliable which is why i bought mine, not for big horsepower numbers. You could set him out and run him down. I believe you also said kid, no offense to any one but most don't understand what power is. Last kid i...

I have a 7.3 powerstroke. He better have a ton of work done to it. A tuner ain't gonna cut it. With the HEUI injection he would at best have 500hp and that is with turbo, injectors, fuel system and custom tunes. Not to mention twice as heavy as you are. You should walk the dog on him.

Mine is right around 195-200. It will creep up to about 215 or so and then the fans come on and cool it right back down. This is with the block filled to just above the freeze plugs.

Thanks. Will have eddy heads on it once i get my lazy tail out in the garage to put them on.

I would not do it. When i bought my dart about 14 years ago, i tried this. I have a 97 wrangler and picked up a tow dolly from my buddy and towed the dart home about 40 miles. I didn't think i was going to make it home in one piece. The car pushed the jeep all over the place, stopping was...

68 dart, iron headed 383, 727, 8 3/4 w/35 spline mosers, spool, disc's ladder bars with coil overs. Stock front suspension, manual steering, steel body except fiberglass hood. 10pt cage, fiberglass buckets, back seat, no heater. 12 gallon fuel cell and 1 battery in the trunk. 15x3.5 pro...

I would say you have more power in that combo. I have a 383, .030 over with trw flat tops, no valve reliefs around .020 in the hole. Using stock 516 heads with the small valves, holley street dominator intake, holley 750 double pumper and the mopar 284/484 cam installed straight up. With this...