whitepunkonnitro

whitepunkonnitro

Well-Known Member From Murfreesboro Tn
Joined
Last seen
Messages
14,798
Reactions
890

Profile posts Latest activity Postings Post Areas About

  • nm9stheham
    Not sure if this is how I reach you..... Do you have a master cylinder cover and gasket in fair to good shape from a 73-76 A body wiht the disc/drum setup? You can email me at [email protected] or reply here. I just don't know my way around this new format yet!
    CL3406
    Do you have the red plastic divider inside the tail light of a 69 swinger? Keeps the back up light from lighting up the whole lens. Thank you.
    H
    will you do 100 plus shipping greyhound on fender.
    they are best way to ship these things.
    whitepunkonnitro
    whitepunkonnitro
    Which fender? And USPS is almost always cheaper on things like fenders
    H
    harris
    the drivers fender for 65 valiant if you still have it.
    sammyd
    I am looking for an oil pan and pickup for a 225 slant pre 66 dart or valiant also i am trying to find out if the metal motor brackets are the same as whats on a 225 slant out of a 68 dart
    tony20110
    Tony,

    I am looking for the wheel cylinder push rods for rear 10 inch brakes. Where can I come up with them? Thanks.

    Tony
    RogerRamRod
    Tony, I am in need of the Drivers side, 2 door, rear window, cast aluminum whateveryoucallit. The piece the glass mounts to. I have a 68 Dart, I THINK they are the same up to 73, but you probably know a lot better than me. I DONT want it complete with broken off glass bolts, I already got one of those, complete with a broken off EZ Out inside the bolt. Tired of dicken with it, I'm out of PB Blaster, EZ-Outs, and patience. Shipping to Chesapeake, VA 23320
    old dog
    Tony, I had wrote about 14x5.5 SBP wheels. Am rethinking to 14x4.5. Any luck. Need 4or5Thanks
    hatters
    Hi Tony, diymirage suggested to contact you. I am wanting a set of Chrome Trim for a full vinyl roof to fit a 1970 Duster. These are the chrome strips at the bottom of the front pillars and the longer ones that go around the rear pillars ..
    Are you able to help?
    growdude
    Hey Tony it's Scott from Fayetteville,you know the gimp with the cane lol.do you have any good a body trunk drop offs and front splash shields that bolt in behind the front wheels.if so how much .I got a set of small valve j heads to trade if your interested just bare heads
    old dog
    Tony, Halifaxhops tells me that you might have some 14x5.5 small pattern steel wheels for sale. I am in Clearwater, Fl. Can you tell me if you do have them and if so how much shipped to Clearwater. Also I am looking for the molding that goes across the front of the hood on a 66 Dart and finally the firewall boot for the throttle cable.
    thanks, Tim
    RustyRatRod
    What are those leaf springs for? You know. The ones you posted on a Mopar A body site? I wanted so bed to post "they are for a Ford truck, dumbass" but I restrained myself.
    cannucky
    Hey Tony how you doing ? I'm in need of a piece for my trunk floor rebuild , the piece I need is the vertical support that the package area floor and the fold down trunk access panel hinge both mount to , any chance you can cut one from a fastback cuda floor for me ?
    wannadrag
    I need the 2 70-71 dart rear marker light assemblies. I also need 2 for the front but in the 72 style. Jay
    38 Dodge
    Good evening Tony
    I got your post on my looking for a V8 push button tranny. I wanted to see what you want for it and what the shipping would be to Biloxi Ms.
    Thanks
    Ron
    1969383S
    Tony,

    Why was the valve cover post for 70 style deleted?

    I have supported what you sell and do, as good for the hobby!!! You always provide OE stuff!

    It was a "wanted" add and not a "For Sale" add. I hope I did not tick you off, but just was trying to point out some inconsistencies in the post!

    Please do not take it as being hostile because it was not meant that way!

    Gerald
    denied88
    tony i was told that you are the man to ask about parts so thought i would check with you im new to the site so i have no idea how this works but if you happen to have a set of front armrests in white for a 1973 dodge dart sport or info where i might be able to get them new or used would be really helpful thanks
  • Loading…
  • Loading…
  • Loading…
  • Loading…

Back
Top